Related Manuals for Edwards EXC300
Summarization of Contents
Introduction
Product Overview and Controls
Details controller description, front panel controls, and basic operational features.
Logic Interface and System Signals
Explains logic interface, electrical supplies, control inputs, status, and analogue outputs.
Vent-Valve, Fail Conditions, and Connections
Covers vent-valve control, fail conditions, emergency states, and electrical connections.
Technical Data
Operating and Storage Conditions
Specifies ambient temperature, humidity, and altitude limits for operation and storage.
Mechanical and Electrical Specifications
Details controller dimensions, electrical data, connectors, and factory default settings.
Installation
Unpacking and Controller Mounting
Instructions for unpacking, inspecting, and fitting the controller to the system.
Electrical Connections and Wiring
Guides on connecting power, pumps, bakeout bands, gauges, and logic interfaces.
Configuration and Setpoint Adjustments
Explains logic interface connection, setpoint/timer adjustments, and vent option configuration.
Operation
System Startup and Standby
Procedure for starting up the system and selecting standby mode.
Operational Modes and Conditions
Covers bakeout band control, high pressure/temp operation, hours counter, and shutdown.
Failures and Resets
Details automatic shutdown, reset procedures, and behavior during electrical supply failure.
Maintenance
Safety and Fuse Replacement
Covers safety precautions for maintenance and instructions for replacing fuses.
Fault Finding and Cleaning
Guidance on troubleshooting fail conditions and cleaning the controller exterior.
Storage and Disposal
Storage Guidelines
Provides instructions for storing the controller in a clean, dry environment.
Disposal Precautions
Safety warnings and environmental requirements for disposing of the controller.
Spares and Accessories
Ordering Information and Spares
Information on ordering spare parts and accessories from Edwards.
Available Accessories
Lists various accessories like vent-valves, air-coolers, and vacuum gauges with item numbers.
Engineering Diagrams
Controller to Pump Connection Diagrams
Schematic diagrams illustrating electrical connections between controllers and EXT pumps.
Need help?
Do you have a question about the EXC300 and is the answer not in the manual?
Questions and answers