Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tenda SD series
Summarization of Contents
Product Overview
Package List
Lists all items included in the camera package for verification.
Computer Requirements
Specifies the minimum hardware and software needed for the camera system.
Introduction
Provides a general overview of HD and SD series IP cameras for surveillance.
Features
Details the key functionalities and technologies of the HD and SD series IP cameras.
Hardware Overview
Identifies and describes the physical components and ports of the IP cameras.
Installation Guide
Hardware Installation
Guides through the physical installation of the IP camera on a table or wall.
Table Install
Instructions for mounting the camera on a flat surface like a table.
Cube IP Camera Table Install
Details the table installation steps for the Cube IP Camera model.
PTZ IP Camera Table Install
Details the table installation steps for the PTZ IP Camera model.
Wall Install
Instructions for mounting the camera on a wall.
Cube IP Camera Wall Install
Details the wall installation steps for the Cube IP Camera model.
PTZ IP Camera Wall Install
Details the wall installation steps for the PTZ IP Camera model.
Hardware Connection
Guides on connecting the camera to power and network cables.
PTZ Camera Connection
Instructions for connecting the PTZ IP Camera to power and network.
Cube IP Camera Connection
Instructions for connecting the Cube IP Camera to power and network.
Setup Wizard Configuration
Running the Setup Wizard
Describes how to start the setup wizard from the included CD.
Language Selection and Start
Guides on selecting the language and initiating the setup wizard.
Hardware Installation Steps
Details the hardware setup process guided by the wizard.
Hardware Connection Steps
Outlines the steps for connecting the camera hardware as per the wizard.
Checking Connections
Instructions to verify power and network connections using the wizard.
Active-X Detection and Installation
Explains the automatic detection and installation of necessary software components.
Basic Camera Configuration
Guides on completing basic configurations for the camera via the wizard.
IP Address Configuration
Details how to search, select, and modify the camera's IP address.
HD Series Web Configuration
View Video
Explains how to view live video streams from the camera and interpret the status bar.
Video and Audio Controls
Covers talk button, audio monitor, PTZ, snap/record, and system settings access.
Running Status
Displays and explains the device's current status, software versions, and network information.
Video Settings
Covers configuration of video parameters like resolution, bit rate, and frame rate.
Video Parameters
Details settings for resolution, bit rate, frame rate, and overlay options for video streams.
Audio Parameters
Guides on setting audio input/output volume and audio encoding types (G.711, G.726).
Image Parameters
Allows adjustment of image brightness, saturation, contrast, and night vision settings.
Network Settings
Covers configuration of network parameters for camera connectivity.
LAN Settings
Configures IP address, subnet mask, gateway, and DNS settings for the local network.
WiFi Setting
Guides on connecting the camera to a wireless network by selecting an SSID and entering a password.
Remote Access Setting
Explains how to configure DDNS or UPnP for remote access to the camera.
ONVIF Settings
Configures the ONVIF protocol for interconnection with NVRs and other devices.
Alarm Setting
Configures the camera's alarm functions, including motion and sound detection.
Motion Detection Setting
Sets up motion detection areas and sensitivity to trigger alarms.
Sound Detection Setting
Enables and configures sound detection sensitivity to trigger alarms.
Alarm Mode Setting
Defines actions to take when an alarm is triggered, like sending emails or snapshots.
Scheduled Time Setting
Allows scheduling specific times for the alarm functions to be active.
Advanced Setting
Covers advanced configurations like auto capture, recording, and email/FTP settings.
Auto Capture
Configures automatic snapping of images to storage at set intervals.
Record to TF/SD
Sets up scheduled recording of video streams to TF/SD cards.
E-mail Setting
Configures email parameters for sending alarm notifications with attached images.
FTP Setting
Configures FTP server details for sending captured images during alarms.
PTZ Protocol Setting
Configures PTZ speed, cruise laps, and self-inspection settings for camera movement.
Status LED Setting
Allows enabling or disabling the status LED indicator light on the camera.
System Setting
Manages system-level configurations like user accounts, time, and reboot.
User Management
Manages user accounts and their authorization levels (Administrator, Operator, Guest).
Time Settings
Configures the camera's date, time, and timezone, syncing with NTP servers.
Reboot IP Camera
Explains how the camera restarts after firmware upgrades or setting changes.
Restore Factory Default
Resets the camera to its original factory default settings.
Backup/Restore Settings
Allows backing up current settings to a file and restoring them later.
Upgrade
Covers the process for upgrading the camera's system firmware and web UI.
System Log
Displays a log of system events and user activities on the camera.
SD Series Web Configuration
View Video
Explains how to view live video streams and control camera functions via the web interface.
Run Status
Displays device firmware, Web UI versions, MAC addresses, and refresh options.
Video Setting
Allows configuration of video parameters such as mode, framerate, brightness, and contrast.
Video Parameters Setting
Configures OSD, IR LED control, flip, and mirror options for the video stream.
Network Setting
Covers network configuration for camera connectivity.
LAN Setting
Configures IP address, subnet mask, gateway, and DDNS server settings.
WiFi Setting
Guides on connecting to a wireless network by scanning, selecting an SSID, and entering a password.
Remote Access Setting
Explains how to set up remote access using DDNS or UPnP port mapping.
Alarm Setting
Configures motion detection sensitivity and armed time for triggering alarms.
Device Name Setting
Allows users to assign a custom name to the camera (e.g., home, office).
Local Recording Path
Configures the default path for saving recorded video files on the local disk.
E-mail Setting
Configures email server details for sending alarm notifications.
FTP Setting
Configures FTP server details for uploading captured pictures during alarms.
System Settings
Manages system-level configurations including user settings, date/time, and reboot.
User Setting
Manages user authority levels for accessing camera functions.
Device Date and Time Settings
Configures the camera's date, time, and timezone by syncing with NTP servers or PC time.
PTZ Settings
Configures PTZ settings like disabling presets, calling presets after reboot, and cruise turns.
Restore Factory Setting
Resets the camera to its original factory default settings.
Reboot Device
Provides an option to reboot the IP camera.
Upgrade Web UI
Explains how to upgrade the camera's Web User Interface.
Upgrade System Firmware
Details the process for upgrading the camera's system firmware.
Need help?
Do you have a question about the SD series and is the answer not in the manual?
Questions and answers