Related Manuals for Genie AWP-36
Summarization of Contents
Safety Rules
Tip-over Hazards
Addresses risks of machine instability, improper outrigger use, and exceeding load limits.
Platform Hazards
Covers risks related to falling from the platform and electrical hazards.
Operational Hazards
Details collision, improper use, and damaged machine risks, plus decal meanings.
Battery Safety
Covers hazards and precautions related to battery charging, burns, explosions, and lifting.
Controls
Ground Controls
Details the controls located on the ground control station for operation.
Platform Controls
Describes the controls available on the platform control station for operation.
Pre-operation Inspection & Function Tests
Pre-operation Inspection
Lists essential checks and inspections to perform before operating the machine.
Breather Cap
Explains the function and correct installation of the breather cap for component protection.
Function Tests
Details the procedures for testing all machine functions to ensure proper operation.
Emergency Stop Testing
Provides steps to verify the functionality of the emergency stop buttons.
Outrigger Interlock Testing
Outlines the process for testing the outrigger interlock system's safety feature.
Manual Lowering Testing
Describes how to test the manual lowering function of the platform.
Operating Instructions
Before Each Use
Key checks and actions to perform before operating the machine.
Setup
Steps for positioning, powering, and preparing the machine for operation.
Emergency Stop Operation
Instructions on how to use the emergency stop buttons to halt all functions.
Manual Lowering Operation
Procedure for safely lowering the platform manually using the hydraulic unit.
Battery and Charger Instructions
Guidelines for charging the machine's DC battery pack safely and correctly.
To Charge Battery
Step-by-step instructions for connecting and charging the battery pack.
Dry Battery Filling and Charging
Procedures for filling and charging batteries that are initially dry.
Transport Instructions
Covers precautions and procedures for safely transporting the machine.
Loading for Transport
Steps involved in loading the machine onto a transport vehicle.
Tilt-back Operation Instructions
Details procedures and safety precautions for operating the tilt-back frame.
Lowering Tilt-back Assembly
Steps for safely lowering the tilt-back frame assembly.
Tilting back Machine
Instructions for tilting the machine back, involving the T-handle and casters.
Stowing Tilt-Back Assembly
Procedure for returning the tilt-back frame to its stowed position.
Returning Machine To Standing Position
Steps to return the machine to its upright, standing position.
Maintenance Inspection
Daily Check List
Provides a checklist for daily inspections of the machine's components and safety features.
Need help?
Do you have a question about the AWP-36 and is the answer not in the manual?
Questions and answers