Related Manuals for Genie AWP-24
Summarization of Contents
Operator's Manual
Important Information
General safety preamble and contact information for Genie Industries.
Genie North America Contact
Contact details for Genie Industries in North America.
Genie Europe Contact
Contact details for Genie Industries in Europe.
Safety Rules Overview
Danger Warning
Warning indicating potential for death or serious injury if rules are not followed.
Operating Conditions
Conditions that must be met before operating the machine.
Battery and Charger Safety
Burn Hazards
Details risks associated with battery acid and protective measures.
Explosion Hazards
Warns about explosive gases emitted by batteries.
Lifting Hazard
Specifies safe lifting practices for battery packs.
Controls
Ground Controls
Identifies and explains the ground control panel elements.
Platform Controls
Identifies and explains the platform control panel elements.
Pre-operation Inspection & Function Tests
Observe and Obey
Key instructions for pre-operation checks and safety.
Breather Cap Information
Information on the function and installation of the breather cap.
Pre-operation Inspection Checklist
Checklist of items to inspect before operating the machine.
Function Tests
Test Emergency Stop
Procedure for verifying the emergency stop button functionality.
Test Outrigger Interlock
Procedure for testing the outrigger interlock system.
Test Manual Lowering
Procedure for testing the manual lowering function.
Operating Instructions
Pre-Operation Checks and Setup
Essential checks and setup procedures before operation.
Controls and Operation
Using emergency stop, manual lowering, and platform controls.
Post-Operation Procedures
Steps for securing and storing the machine after use.
Battery and Charger Instructions
Observe and Obey
Crucial safety guidelines for battery and charger use.
To Charge Battery
Step-by-step guide for charging the battery pack.
Dry Battery Filling and Charging
Procedure for filling and charging dry batteries.
Transport Instructions
Observe and Obey
Safety guidelines for transporting the machine.
Loading for Transport
Steps for safely loading the machine onto a transport vehicle.
Tilt-back Operation Instructions
Observe and Obey
Key safety precautions for tilt-back operation.
Lowering Tilt-back Assembly
Procedure for safely lowering the tilt-back frame.
Maintenance Inspection
Daily Check List Items
Key checklist items for daily machine inspections.
Decals
Decal Descriptions and Part Numbers
List of decals with descriptions and part numbers.
Fiberglass Platform Option Decals
Decals specific to the fiberglass platform option.
AWP-19 & 24 Decal Locations
Diagram showing decal locations on AWP-19 and AWP-24 models.
AWP-30 & 36 Decal Locations
Diagram showing decal locations on AWP-30 and AWP-36 models.
Need help?
Do you have a question about the AWP-24 and is the answer not in the manual?
Questions and answers