Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety Rules
- 3 Controls
- 4 Legend
- 5 Pre-Operation Inspection
- 6 Maintenance
- 7 Function Tests
- 8 Workplace Inspection
- 9 Operating Instructions
- 10 Battery Charging Instructions
- 11 Transport Instructions
- 12 Tilt-Back Operation Instructions
- 13 Decals
- 14 Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for Genie AWP-25S
Summarization of Contents
Safety Rules
Tip-over Hazards
Guidelines and warnings to prevent machine tip-over during operation.
Fall and Electrocution Hazards
Safety precautions against falls from the platform and electrocution risks.
Operational and Machine Integrity Hazards
Warnings on collision, improper use, bodily injury, and machine damage risks.
Battery and Explosion Safety
Safety procedures for handling batteries and preventing explosions.
Controls
Ground Control Stations
Identification and layout of controls located at ground level.
Platform Control Stations
Identification and layout of controls located in the work platform.
Pre-operation Inspection
Inspection Procedures and Checklist
Detailed steps and items to check before operating the machine.
Maintenance
Battery Maintenance Procedures
Instructions for checking and maintaining the battery for DC models.
Fluid Level and System Checks
Checks for hydraulic oil, air line lubricator oil, and tire pressure.
Scheduled Maintenance Intervals
Information on periodic maintenance to be performed by qualified technicians.
Function Tests
Test Setup and Emergency Stop Function
Procedures for setting up and testing the emergency stop functionality.
System Interlock and Lowering Function Tests
Testing of outrigger interlocks and platform lowering systems.
Operating Instructions
Machine Setup and Platform Operation
Steps for positioning, powering, and operating the platform lift.
Emergency Lowering Procedures
Methods for safely lowering the platform in emergencies.
Battery Charging Procedures
Instructions for charging the machine's battery pack.
Transport and Loading Procedures
Guidelines for safely transporting and loading the machine.
Tilt-back Frame Operation
Instructions for using the tilt-back feature to navigate doorways.
Decals
Decal Inspection and Location Guide
Procedures for checking decal legibility and identifying decal locations.
Specifications
Machine and Standard Base Specifications
Technical data for machine height, weight, and standard base dimensions.
Narrow Base Outrigger and Access Specifications
Dimensions related to narrow base outriggers and corner access.
Rough Terrain Base Outrigger and Access Specifications
Dimensions for rough terrain base outriggers and corner access.
Need help?
Do you have a question about the AWP-25S and is the answer not in the manual?
Questions and answers