Table of Contents
Advertisement
MAX 1500 PRO/2200 PRO/f18 PRO
MATRIX III
CONFORMS TO UL STD 325
CONFORMS TO UL STD 325
MAX 1500 PRO/2200 PRO UL CLASS - I, II, III, IV
MAX F18 PRO UL CLASS - III, IV ONLY
CERTIFIED TO CAN/CSA STD
C22.2 NO. 247
Brushless DC Slide Gate Operators
Version 7a
Residential/Commercial
Made in USA
www.max.us.com
Installation Guide for
Slide Gate Operators
SAFETY SENSORS REQUIRED
4009963
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Max 2200 PRO
Summarization of Contents
UL 325 COMPLIANT INSTALLATION REQUIREMENTS
Gate Operator Installation Compliance
UL 325 requirements for gate operator installation, location, and clearances.
Safety Controls and Sensor Placement
Guidelines for control placement, safety sensors, and entrapment prevention.
IMPORTANT SAFETY INFORMATION
General Safety Instructions and Warnings
Essential safety guidelines, warnings, and maintenance advice for gate operators.
UL 325 MODEL CLASSIFICATIONS
Gate Operator Classification Types
Defines UL 325 gate operator classes based on application and use.
Required Entrapment Protection
Details minimum entrapment protection devices needed per UL 325 standards.
INTENDED USE OF SLIDE GATE OPERATOR
Intended Use and Safety Features
Describes the intended application of the gate operator and key safety features.
STEP-BY-STEP INSTALLATION
Operator Placement and Chain Connection (Standard)
Instructions for front-mounted operator placement and chain attachment.
Rear Mounting Position and Chain Connection
Guidelines for alternate rear mounting and chain connection for gate operators.
AC INPUT POWER AND GROUNDING
AC Input Power Connection
Steps for connecting AC power to the gate operator.
Ground Operator Requirements
Procedures for properly grounding the gate operator for lightning protection.
OPERATOR CONFIGURATION AND WIRING
Opening Direction and ID Plug Setup
Configuration of gate opening direction and installation of the ID plug.
Entrapment Protection Wiring
Wiring instructions for various entrapment protection sensors and devices.
PROGRAMMING AND SENSOR MANAGEMENT
Virtual Limit and Gate Position Programming
How to program virtual limits and learn gate positions for operator control.
ERD Sensor Adjustment and Loop Detection
Adjusting the ERD sensor and integrating loop detectors for gate operation.
MATRIX III CONTROL SETTINGS
Matrix III Settings and Modes
Configuring battery backup, close timer, gate speed, and control features.
GATE TAMPER FEATURE
Gate Tamper Functionality
Understanding and configuring the gate tamper functionality.
GATE DISABLE FEATURE
Gate Disable Functionality
Instructions for enabling and using the gate disable functionality.
DUAL GATE OPERATOR WIRING
Dual Gate Operator Wiring Instructions
Instructions for wiring and configuring two gate operators for synchronized operation.
TROUBLESHOOTING AND DIAGNOSTICS
USB Port Diagnostics and Event History
Using the USB port to view errors and event history for troubleshooting.
Gate Cycling and LED Troubleshooting
Resolving common gate movement issues and interpreting LED status indicators.
COMMON SAFETY SENSOR INSTALLATION
Photocell Sensor Wiring and Alignment
Guides for installing OMRON and EMX photocell sensors for entrapment protection.
Wireless and Loop Detector Sensor Integration
Installation for EMX IRB-MON thru-beam and Miller RBAND wireless sensors.
WIRING OVERVIEW AND OPTIONAL ACCESSORIES
Comprehensive System Wiring Diagram
A visual overview of all electrical connections for the gate operator system.
Optional Magnet Limit and Solar Power Setup
Installation instructions for optional magnet limit sensors and solar power systems.
Need help?
Do you have a question about the 2200 PRO and is the answer not in the manual?
Questions and answers