Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
RLC1
RMC1
(Shown installed to
(Shown installed to
1-1/2" NPT column
UL Listed Chief CPA column
as example only)
as example only)
Single Flat Panel Ceiling Mounts
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
RMC1 / RLC1
Advertisement
Related Manuals for CHIEF RLC1
Summarization of Contents
Disclaimer and Definitions
Mounting System Definition
Defines the primary Chief product to which accessories/components attach.
Accessory Definition
Defines a secondary Chief product attached to a primary product.
Component Definition
Defines an audiovisual item attached to a mounting system or accessory.
Safety Warning and Caution Definitions
Defines WARNING for injury/death and CAUTION for equipment damage.
Critical Safety Instructions
Adherence to Instructions
Emphasizes following all instructions to prevent injury, damage, or warranty voiding.
Structural Integrity
Stresses the need for adequate structural strength to support five times the equipment weight.
Mounting Column Requirements
Specifies compatible mounting column types: 1-1/2" NPT/NPSM or UL Listed Chief CPA.
Product Dimensions
RMC1 Dimensions
Detailed measurements and mounting patterns for the RMC1 ceiling mount.
RLC1 Dimensions
Detailed measurements and mounting patterns for the RLC1 ceiling mount.
Installation Legend and Symbols
Fastener Operations
Explains symbols for tightening and loosening fasteners.
Tool Identification
Identifies symbols for Phillips screwdriver, open-ended wrench, and hex-head wrench.
Action and Status Indicators
Defines symbols for adjust, remove, optional, and by hand actions.
Tools for Installation
Required Tools
Lists necessary tools including wrenches, screwdrivers, and included bits.
Component Parts List
Hardware Kits
Details hardware kits (Bag A, B, C) with screws, washers, and spacers.
Mount Assemblies and Accessories
Lists ceiling mount assemblies (RMC1, RLC1) and associated parts like back cover and couplings.
Installing the Mount
Attaching to NPT Column
Instructions for mounting the system onto a 1-1/2" NPT or NPSM threaded extension column.
Attaching to Chief CPA Column
Instructions for mounting the system onto a UL Listed Chief CPA extension column.
Attaching Brackets to Display
Bracket Preparation and Alignment
Steps for lowering latch mechanisms and aligning interface brackets with the display's center.
Fastening Brackets to Display
Guidance on selecting correct screws/spacers and attaching brackets, noting M8 screw exceptions.
Mounting Display to Ceiling
Securing Display to Mount
Instructions for lowering the display onto the mount and securing it with latch mechanisms.
Fastening Display Brackets
Steps to fasten the display brackets to the ceiling mount rail using specific screws.
Adjusting Tilt
Tilt Adjustment Procedure
Steps for loosening, adjusting, and tightening tilt screws for desired angle.
Locking Tilt Angles
Method to lock specific tilt angles (0°, 5°, 10°, 15°) using screws and lock nuts.
Security and Cover Installation
Optional Padlock Security
Guidance on using an optional padlock to secure the display to the mount.
Installing Back Cover
Instructions for installing the back cover to conceal wiring and mounting hardware.
Need help?
Do you have a question about the RLC1 and is the answer not in the manual?
Questions and answers