Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
RLC1
RMC1
(Shown installed to
(Shown installed to
1-1/2" NPT column
UL Listed Chief CPA column
as example only)
as example only)
Single Flat Panel Ceiling Mounts
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
RMC1 / RLC1
Advertisement
Related Manuals for CHIEF RMC1
Summary of Contents for CHIEF RMC1
- Page 1 I N S T A L L A T I O N I N S T R U C T I O N S RLC1 RMC1 (Shown installed to (Shown installed to 1-1/2" NPT column UL Listed Chief CPA column as example only) as example only) Single Flat Panel Ceiling Mounts Spanish Product Description German Product Description...
-
Page 2: Important Safety Instructions
AN ACCESSORY is the secondary Chief threaded extension column (not included); OR a UL product which is attached to a primary Chief product, and may have a component attached or setting on it. Listed Chief CPA extension column (not included). -
Page 3: Installation Instructions
Installation Instructions RMC1 / RLC1 DIMENSIONS RMC1 18.00 457.2 MAX MOUNTING PATTERN 7.87 [200] MIN MOUNTING PATTERN RLC1 24.00 609.6 MAX MOUNTING PATTERN 7.87 [200] MIN MOUNTING PATTERN 15.75 400.0 MAX MOUNTING PATTERN... - Page 4 RMC1 / RLC1 Installation Instructions LEGEND Tighten Fastener Adjust Apretar elemento de fijación Ajustar Befestigungsteil festziehen Einstellen Apertar fixador Ajustar Serrare il fissaggio Regolare Bevestiging vastdraaien Afstellen Serrez les fixations Ajuster Loosen Fastener Remove Aflojar elemento de fijación Quitar Befestigungsteil lösen...
-
Page 5: Tools Required For Installation
Installation Instructions RMC1 / RLC1 TOOLS REQUIRED FOR INSTALLATION 3/32" (included) 1/8" (included) 5/32" (included) 1/2" or 13mm PARTS [Interface Bracket Hardware Kit] R (2) Bag A Q (2) A (4) 5/16" C (4) D (4) B (4) 5/16" x 1"... - Page 6 Figure 2 NOTE: Proceed to Attaching Mount to NPT Column section or Attaching Mount to Chief CPA Column section, as Attaching Mount to Chief CPA Column appropriate. Attaching Mount to NPT Column CAUTION: WATCH FOR PINCH POINTS! Do not place fingers between moveable parts.
- Page 7 Installation Instructions RMC1 / RLC1 Install and tighten two 5/16" x 3/4" set screws (W) through back of mount (Z) and against column. (See Figure 4) (L or M) (W) x 2 (BB) Figure 4 (A-L) Center of bracket Attaching Interface Brackets to Display Lower the latch mechanism on each interface bracket (BB).
- Page 8 RMC1 / RLC1 Installation Instructions Attaching Display to Ceiling Mount Ensure that the latch mechanisms on interface brackets (BB) are already lowered. (See Figure 5) While supporting both sides of display, lower display onto ceiling mount, hooking top of interface brackets onto front of ceiling mount.
- Page 9 Installation Instructions RMC1 / RLC1 Tilt Security and Cover OPTIONAL: Add padlock (not included) to each interface The ceiling mounts allow -5° to 20° tilt. The ceiling mount can bracket to lock display to ceiling mount. (See Figure 13) be locked at 0°, 5°, 10° and 15° tilt.
- Page 10 RMC1 / RLC1 Installation Instructions...
- Page 11 Installation Instructions RMC1 / RLC1...
- Page 12 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief Manufacturing, a products division Asia Pacific A Office No. 918 on 9/F, Shatin Galleria of Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the RMC1 and is the answer not in the manual?
Questions and answers