Table of Contents
Advertisement
AIR HOSE (428)
FIGURE I
9.
To clean or replace a 5-Way Valve (432): Remove the Left Cover (8) which is
located on the left side of the Body (1). Remove the Air Hoses (428, 429, 430)
from the 5-Way Valve - note the locations they are removed from. Clean the 5-
Way Valve, using a jet of compressed air. Or if necessary, replace the unit and
reattach air hoses to 5-Way Valve. (See Figure I.)
1.
Situation:
Turntable does not rotate.
possible Reasons:
A. The Power Plug is not inserted in its electrical outlet or no power from the
main electrical supply source.
B. The Motor is malfunctioning
C. The Reverse Pedal is broken.
D. The Belt is loose or broken.
Solutions:
A. Insert the Power Plug, and reset the main electric supply source.
b. Check for loose wires in the Motor.
C. Check and repair entire Reverse Pedal assembly.
d. Adjust or replace the Belt.
2.
Situation:
Turntable locks while mounting/removing tire.
possible Reason:
The belt is loose.
Solution:
Adjust belt tension.
3.
Situation:
Jaws slow to open/close
possible Reason:
SKU 90589
For technical questions, please call 1-800-444-3353.
TROUblESHOOTING GUIdE
AIR HOSE (430)
AIR HOSE (429)
SIlENCER
5-WAy VAlVE (432)
Page 19
Hide quick links:
Advertisement
Table of Contents
