Specific Safety Rules - Central Machinery 90589 Assembly And Operating Instructions Manual

1. Maintain a safe working environment.
sure there is adequate surrounding workspace. Always keep the work area free
of obstructions, grease, oil, trash, and other debris. Do not use this product in
areas near flammable chemicals, dusts, and vapors.
2. Maintain labels and nameplates on the Tire Changer.
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
3. Use eye and hearing protection.
eye goggles and hearing protectors when using this product.
4. do not allow children to use or play with this product.
5. Store idle equipment.
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
6. Do not use this product if under the influence of alcohol or drugs.
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
7. dress properly.
moving parts. Wear restrictive hair covering to contain long hair. Wear heavy
duty gloves when handling tires, but be careful to keep gloves away from all
moving parts of the Tire Changer.
8. do not overreach.
over or across running machines.
9. Industrial applications must follow OSHA requirements.
10. Maintain this product with care.
performance.
11. Maintenance:
regularly by a qualified technician.
12. Check for damaged parts.
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
13. Replacement parts and accessories:
replacement parts. Only use accessories intended for use with this product.
Use the right tool or attachment for the job.
14.
tool or attachment to do the work of a larger industrial tool or attachment. There
SKU 90589 For technical questions, please call 1-800-444-3353.

SpECIFIC SAFETy RUlES

When not in use, tools and equipment should be stored
Do not wear loose clothing or jewelry as they can be caught in
Keep proper footing and balance at all times. Do not reach
For your safety, service and maintenance should be performed
Before using this product, carefully check that it will
Keep the work area well lit. Make
Always wear ANSI approved safety impact
Keep this product clean for better and safer
When servicing, use only identical
Do not attempt to force a small
These carry important
Read
REV 07g
Page 5