Central Machinery 90589 Assembly And Operating Instructions Manual page 15

To Mount The Tire Onto The Wheel Rim: (continued)
7. Continue until the bead farthest away is
completely onto the wheel rim.
10. Keep the tire bead pressed down into
the wheel rim channel with your hands
(or the lever). Then, depress the reverse
pedal to rotate the turntable clockwise.
SKU 90589 For technical questions, please call 1-800-444-3353.
8. Insert the inner tube (if there is one). And
spread tire grease (or a similar lubricant)
liberally on the complete circumference of
the tire bead.
11. Continue this process throughout the entire
circumference of the wheel and tire.
9. Move the tire so that the bead passes
below the front section of the mounting head
and is brought up against the edge of the
rear section of the mounting head.
12. If the tire locks up in above step,
pull the reverse pedal up to rotate the
turntable counterclockwise to unlock it.
Check the wheel rim and the tire are of
the same size. And try again.
Page 15