Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for FLIR PT-617 HD
Summarization of Contents
PT-Series HD Camera Installation Guide
Introduction to Installation Topics
Overview of the manual's scope, listing key areas like installation, operation, and specifications.
Camera Overview and Connection Options
Camera Overview
Details analog/IP video, mounting, and connection types available for the camera.
Serial Communications and Components
Serial Communications Configuration
Overview of configuring serial settings via hardware DIP switches or software.
Supplied and Required Components
Lists included camera components and items the installer must provide.
Installation Site, Bench Testing, and Mounting
Location Considerations
Factors for selecting an optimal installation location for the camera.
Bench Testing Procedures
Steps for testing camera connections and functionality before mounting.
Camera Mounting Guidelines
Instructions for proper camera mounting, including electrical isolation.
Earth Ground Connection for Protection
Importance of Earth Grounding
Method for establishing earth ground connection for surge protection and corrosion prevention.
Galvanic Isolation Kit Installation
Installation Safeguards and Kit Contents
Safeguards for installation, and list of components in the Galvanic Isolation Kit.
Installing the Camera with Isolation Kit
Step-by-step instructions for mounting the camera using the isolation kit.
Camera Connections Overview
Removing the Camera Back Cover
Procedure for accessing camera connections by safely removing the back cover.
Connecting Camera Power
Power Supply and Grounding
Connecting power, grounding, and using the noise suppression ferrite.
Video, Ethernet, and Serial Connectivity
Analog Video Connection Details
Using BNC and RCA connectors for analog video output.
Ethernet Connection Setup
Connecting shielded Ethernet cable through cable glands for IP network.
Serial Connection Configuration
Setting serial parameters: signaling, baud rate, protocol, and address.
Serial Communications DIP Switch Settings
DIP Switch Overview and Function
Location and function of DIP switches for serial configuration.
Setting Serial Address (ID)
Using SW102 to set the camera's serial address (decimal 1 to 255).
Other Serial Communication Parameters
Baud Rate and Protocol Settings
Configuring baud rate, control protocol, and serial communication standard.
Software Override DIP Switch Function
Determining whether to use software settings or DIP switch settings.
Cable Gland Sealing and Kit Contents
Proper Cable Gland Sealing Procedure
Ensuring water-tight fittings by correctly installing cable glands and seals.
Cable Glands and Spare Parts Kit Contents
Contents of the kit for non-conduit installations, including glands and plugs.
PT-Series HD Camera Specifications
Thermal Camera Specifications
Details on array format, detector type, spectral range, and FOV.
Visible Camera Specifications
Details on detector type, resolution, optical zoom, and lens.
Camera General and Environmental Specifications
Pan/Tilt and General Specs
Pan/tilt angles, speed, weight, dimensions, and approvals.
Environmental Specifications
IP rating, operating temperature range, and storage temperature.
Basic Operation and Configuration Introduction
IP Camera and ONVIF Compliance
Camera as a server, VMS client compatibility, and ONVIF Profile S.
Serial vs. IP Communications
Configuring legacy systems via serial or web browser.
Server Configuration Basics
Setting IP parameters, login passwords, and scene-specific settings.
Camera Bench Test Procedures
Testing analog video and IP connections before mounting.
Configuring IP Address with FLIR DNA
Using FLIR Discovery Network Assistant (DNA)
Steps for using DNA software to discover and assign IP addresses.
Accessing the Camera Web Interface
Login Credentials and Access Levels
User roles (user, expert, admin) and their respective access privileges.
Live Video Web Page Interface
Live Video Display and Controls
Viewing live feed, controls, virtual joystick, and frame rate selection.
Help and Log Out Functions
Accessing software version info, help, and logging out of the session.
Camera Control and Web Panel Functions
Camera Control and Status Indicators
Understanding control and status lights for camera operation.
Web Control Panel Button Operations
Using buttons for zoom, snapshots, and accessing thermal/visible keypads.
Camera Configuration and User Accounts
Pan/Tilt Home and Preset Control
Setting home position and navigating to preset camera locations.
Expert and Admin Account Access
Accessing Setup and Maintenance menus via expert or admin logins.
Setup Menu for Camera Configuration
GEO Settings and Surveillance Zones
Configuring GEO settings and defining surveillance zones.
Saving Configuration Changes
Importance of saving changes made in the Setup menu for power-up.
IP Video Stream Settings
Understanding Default Video Streams
Default streams from DLTV and IR sensors, and client compatibility.
Modifying IP Video Stream Parameters
Adjusting encoding, frame rate, and resolution for IP video.
Video Encoding and Bandwidth Impact
Codec, Bit Rate, and Resolution Effects
How codec, bit rate, and resolution affect video quality and bandwidth.
Infrared (IR) Image Adjustments
AGC ROI Configuration
Defining the Region of Interest for the Automatic Gain Control algorithm.
Tuning IR Image Parameters
Adjusting brightness, contrast, sharpness, and AGC filter for optimal IR images.
Pan/Tilt and Surveillance Scan Lists
Camera Pan/Tilt Coordinate Control
Setting camera coordinates, speed, and navigating to preset locations.
Setting Up Surveillance Scan Lists
Creating and managing scan lists for automated camera movements.
Surveillance Auto Scan Modes
Relative Auto Scan Configuration
Configuring relative auto scan based on current camera position.
Absolute Auto Scan Configuration
Configuring absolute auto scan starting from zero azimuth position.
Maintenance and Network Settings
Accessing the Maintenance Menu
Navigating the Maintenance menu for system settings via admin login.
Server LAN Settings Configuration
Setting hostname, IP address, netmask, and gateway for network interface.
Date and Time Configuration
NTP Server Time Synchronization
Setting date, time, and time zone using an NTP server.
Manual Date and Time Entry
Manually setting custom date, time, and time zone via pop-up window.
Server Status and System Reboot
Monitoring Server Status
Viewing server status, uptime, user count, and processor load.
Restarting the Server
Stopping and starting the server to apply configuration changes.
Security Options and Password Management
Restricting Web Configuration Access
Limiting web access by IP address for enhanced security.
Setting User Account Passwords
Changing passwords for user, expert, and admin accounts.
Communication and VMS Integration
Serial Remote Communication Settings
Configuring serial remote protocols like Pelco-D and Bosch.
VMS Remote Interface Configuration
Integrating with Video Management Systems using ONVIF 2.0.
IR Zoom Control and Startup Actions
IR Zoom Slave Functionality
Slaving IR camera zoom to DLTV camera for synchronized operation.
Camera Startup Actions
Selecting actions like Home, Park, or Scan List at camera startup.
Video Stream Management
Understanding Default Video Streams
Details on DLTV and IR video streams, including access URLs.
Video Stream Settings and Protocols
RTP/RTSP and Multicast Configuration
Configuring RTP/RTSP traffic, multicast, and network security.
Stream Settings for Quality and Bandwidth
Adjusting codec, bit rate, and I-frame interval for stream quality.
Firmware and Configuration Management
Camera Firmware Update Procedure
Steps to upload and install new firmware files.
Configuration Backup and Recovery
Backing up, downloading, and restoring camera configuration files.
Field Support Log Download
Downloading Field Support Log
Downloading a zip file of the log for service evaluation.
Thermal Imaging Overview
Cryocooler Operation and Cooling Down
Explanation of the cryocooler's operation and the initial cooling period.
Interpreting Thermal Image Differences
Understanding how temperature differences create visible thermal images.
Troubleshooting Common Issues
Contacting FLIR Support and Training
Information on reaching FLIR support and training resources.
Resolving No Video Issues
Steps to diagnose and fix problems with video output.
Troubleshooting Ethernet Communication
Diagnosing and resolving issues with network connectivity.
Fixing Video Stream Display Problems
Resolving issues with viewing video streams in client software.
Addressing Image Quality Issues
Diagnosing Noisy or Poorly Lit Images
Troubleshooting noisy images, brightness issues, and sun exposure artifacts.
Serial Address Decimal to Binary Conversion
Understanding Switch Order
Explanation of DIP switch order and binary equivalents for serial addresses.
Serial Address Conversion Table
Table mapping decimal addresses to binary switch settings (1-255).
Need help?
Do you have a question about the PT-617 HD and is the answer not in the manual?
Questions and answers