Connecting Personal Computers and Video Equipment
Connections with Video and S-Video Signals
Video Equipment with VIDEO Connectors
• Connect to the projector's VIDEO connector by using a commercially available video cable.
• The input setting of the VIDEO connector has been set to "Auto" at the factory; however, if the projector does not project,
change the input setting to "Your Country's Television Broadcast System" using the menu sequence of [Setup] → [Input Format]
→ [Video].
See "Input Format" on Page E-44.
Video Equipment with S-VIDEO Connectors
• Connect to the projector's S-VIDEO connector by using a commercially available S-Video cable.
• The input setting of the S-VIDEO connector has been set to "Auto" at the factory; however, if the projector does not project,
change the input setting to "Your Country's Television Broadcast System" using the menu sequence of [Setup] → [Input format]
→ [S-Video].
See "Input Format" on Page E-44.
Video cable (RCA pin plug)
(Commercially available)
S-Video cable (Mini DIN 4-pin plug)
(Commercially available)
E-13
Video deck, DVD player, document
camera, etc.
S-VIDEO
VIDEO