Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Equipment Has a YCbCr Connector or YPbPr Connector
• The projector has been set to "Auto" at the factory; however, if it does not project, change the input setting to "Component" by
using the menu sequence of [Setup] → [Input Format] → [RGB].
See "Input Format" on Page E-44.
• When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or
another color, change the setting under the menu of [Color] → [Color Space].
See "Color Space" on Page E-38.
Component cable (Available as an option)
(Mini D-sub 15-pin to RCA 3)
Component cable (Available as an option)
(Mini D-sub 15-pin to RCA 3)
Green
Blue
Red
E-14
Green
Blue
Red
Y
Cb
COMPONENT
COMPONENT
Y
Pb
Cr
Pr