Table of Contents
Advertisement
GEBRUIKERSHANDLEIDING/ USER'S MANUAL
BETRIEBSANLEITUNG / MODE D'EMPLOI
Mass SINE 12/1000 & 24/1000 - 117V / 60Hz
Mass SINE 12/1200 & 24/1500 - 230V / 50Hz
Mass SINE 12/2000, 24/2500 & 48/2500 - 230V / 50Hz
Mass SINE 12/2000 & 24/2500 - 117V / 60Hz
MASTERVOLT
Snijdersbergweg 93, 1105 AN Amsterdam
The Netherlands
Tel.: +31-20-3422100
V3. November 2000
Fax: +31-20-6971006
Advertisement
Table of Contents
Related Manuals for Mastervolt Mass SINE 12/1000
Summarization of Contents
1 GENERAL INFORMATION
1.1 USE OF THIS MANUAL
Guide for safe, effective operation, maintenance, and minor malfunction correction.
1.2 GUARANTEE SPECIFICATIONS
Details Mastervolt's guarantee for unit compliance with standards and specifications.
1.3 QUALITY
Covers exhaustive testing and inspection of units prior to delivery.
1.4 VALIDITY OF THIS MANUAL
Specifies manual applicability to Mastervolt-delivered standard MASS inverter versions.
1.5 LIABILITY
Mastervolt disclaims liability for damage from inverter use or manual errors.
1.6 CHANGES TO THE INVERTER
States that inverter modifications require written Mastervolt permission.
2 SAFETY GUIDELINES AND MEASURES
2.1 WARNINGS AND SYMBOLS
Explains safety symbols like 'CAREFUL!' and 'WARNING' for damage and injury prevention.
2.2 USE FOR INTENDED PURPOSE
Defines proper installation environment and usage guidelines for the inverter.
2.3 ORGANIZATIONAL MEASURES
User requirements for manual access and familiarity, focusing on safety chapters.
2.4 MAINTENANCE & REPAIR
Procedures for securing the inverter during maintenance and using original spare parts.
2.5 WARNING FOR SPECIFIC DANGERS
Instructions for earth connection, RCCB use, and wiring checks for defects.
2.6 WARNING REGARDING LIFE SUPPORT APPLICATIONS
Mastervolt products are not for life support use without specific agreements.
3 INSTALLATION
3.1 ENVIRONMENT
Instructions for installing the inverter in a dry, well-ventilated area away from batteries.
3.2 WIRING
Discusses wire routing's impact on EMC behavior and electromagnetic interference.
3.3 MOUNTING OF THE CABINET
Step-by-step instructions for mounting the inverter cabinet using screws or bolts.
3.4 CONNECTING
Details on connecting AC, earth wiring, and DC wiring, including cable specifications.
3.5 CONNECTING THE REMOTE CONTROL PANEL
How to connect the C4-RI remote control panel using a telephone cable.
3.6 COMMISSIONING AFTER INSTALLATION
Instructions for final checks before powering on, including polarity and fuse insertion.
3.7 AUTOMATIC SWITCHING BETWEEN MASS INVERTER, THE AC GENSET AND/OR SHORE POWER
Advice on using genset or shore power connections to avoid inverter damage.
4 OPERATION
4.1 INTRODUCTION
Overview of the MASS SINE inverter's features, high efficiency, and protective functions.
4.2 SWITCHING ON AND OFF
Procedures for turning the inverter on and off via the front switch or remote control.
4.3 INDICATOR LIGHTS
Explanation of the functions of indicator lights: 'inverter on', 'overload', 'low battery', and 'temperature'.
4.4 ON THE REMOTE CONTROL
Guide to using the remote control and interpreting the 'inverter on' and 'failure' LEDs.
8 ENERGY SAVING MODES
8.1 LOW ENERGY MODE
How to set the inverter to low energy mode by adjusting output voltage at no load.
8.2 STAND BY MODE
How to set the inverter to standby mode for extremely low energy consumption and load checking.
Need help?
Do you have a question about the Mass SINE 12/1000 and is the answer not in the manual?
Questions and answers