Operations Using Nodes; Adding Nodes (1); Adding Nodes (2) - Denon RC-7000CI Owner's Manual

LCD button
LCDボタン
RC SETUP
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit

Operations using nodes

Adding nodes (1)

LCD button
LCDボタン
Use this procedure to register a node number and add an
RC-7001RCI (sold separately) to the network.
NEXT 1
RC SETUP
Press
The "PROGRAM DEVICE" menu is displayed.
2
NEXT
Press
3
[ADD NODES]
Press
4
NEXT
Press .
5
To add the remote control unit to the
network, press
6
RESET/CONFIG
Press
(sold separately) for about 1 second.
The indicator flashes green.
7
NEXT
Press
"Success!" is displayed when the device has been
added successfully.
b Press NEXT to return to the settings menu.
for 3 seconds.
[NETWORK]
twice, then press .
.
[REMOTE]
.
on the RC-7001RCI
twice.

Adding nodes (2)

Use this procedure to add a second or more units of the
RC-70001CI (sold separately) to the network.
Press RESET/CONFIG on the RC-7001RCI (sold separately) for at
least 10 seconds so that the indicator lights red.
1
RC SETUP
Press for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
NEXT
Press twice, then press
3
[ADD NODES]
Press .
4
NEXT
Press .
5
To add the RC-7001RCI to the network,
[OTHER]
press .
6
RESET/CONFIG
Press on the RC-7001RCI
(sold separately) for about 1 second.
The indicator flashes red.
7
NEXT
Press twice.
"Success!" is displayed when the device has been
added successfully.
b Press NEXT to return to the settings menu.
[NETWORK]
.