Network Function - Denon RC-7000CI Owner's Manual

Network function

This functions uses the RC-7001RCI (sold separately).
When a wireless (RF) network is established using the RC-7001RCI (sold separately), the RC-7001RCI is called a node. An
individual node number is registered for each RC-7001RCI unit. When registering devices with the RC-7001RCI, once the RF
transmission settings are made, when a button on a device for which the node number is set is pressed, the remote control
signals are sent (wireless) and received by the RC-7001RCI corresponding to the node number of the transmission target.
Monitor
FR FL
Monitor
FR

Repeater 1
(RC-7001RCI, sold
separately)
Repeater 2
(RC-7001RCI,
Remote control
sold separately)
(RC-7000CI)
FL
AV amplifier
• Using the wireless function near microwave ovens, devices
using a wireless LAN, cordless telephones, Bluetooth
devices or other wireless devices could adversely affect
communications performance. In this case move away from
the interfering device.
• If the RC-7000C1 cannot properly receive radio signals due
to excessive distance between it and the RC-7001RC1 (sold
separately), radio interference, etc., "RF OUT OF RANGE"is
displayed on the LCD screen.
Monitor
AV amplifier
DVD player
DVD player
NOTE
: IR (Infrared communications)
: RF (Two-way communications)