Pc Application; Rc-7000Ci Editor Function; Rc-7000Ci Editor Installation; Using Rc-7000Ci Editor - Denon RC-7000CI Owner's Manual

PC Application

RC-7000CI Editor function

n
Y ou can use "RC-7000CI Editor" for the
following operations.
• Editing RC-7000CI setting data.
• Backing up RC-7000CI setting data on the PC.
• Remote control code database downloading.
n
R ecommended devices and
required for using "RC-7000CI Editor" .
• Personal computer running Windows ® XP Service Pack2
operating system.
• HDD with sufficient free disk space.
• USB 2.0 connection terminal.
• Internet connection environment


RC-7000CI Editor installation

First connect the RC-7000CI to the personal computer using
the USB cable provided.
Use a computer connected to the Internet.
1
Load the CD-ROM (RC-7000CI Editor) in
the CD-ROM drive.
2
Run "RC-7000CI Editor.exe"
b Follow the installation instructions on the installation
wizard screen.
b After installation, the "Installation complete" dialog
environment
message is displayed.
3
Press "Finish" to finish installation, and
start the application.

Using RC-7000CI Editor

1
When using the application for the first
time, check the New User box, enter e-mail
address, password, etc., and press OK.
2
Run "RC-7000CI Editor.exe" from the CD-
ROM drive in My Computer.
"RC-7000CI Editor" starts up.
3
Follow the wizard instructions.
NOTE
• During data upload or download using "RC-7000CI Editor"
do not carry out the following operations. Failure of the main
unit and personal computer may result.
• Remove the USB cable.
• Switch off the personal computer power.
• Remove batteries from main unit.