Deleting Signals Registered With The Learning Function - Denon RC-7000CI Owner's Manual

LCD button
LCDボタン
RC SETUP
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit

Changing the button name
1
RC SETUP
Press
The "PROGRAM DEVICE" menu is displayed.
LCD button
LCDボタン
2
NEXT
Press , then press
3
NEXT
[KEY NAME]
Press
4
At the "Select Device" screen, press the
button
for the device whose button name
you want to change.
5
At the "Select key" screen, select the
button
for the button whose button name
you want to change.
6
NEXT
Press .
7
At the "Edit Text" screen, use the first
LCD buttons
column of
of the character to be edited.
8
Select the character to be input with the
second column of
[SELECT]
.
Lower case letters are input when [CAPS] is displayed,
b
capital letters when [lower] is displayed.
Up to 12 characters can be input.
9
[SAVE]
Press
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
for 3 seconds.
[EDIT TEXT]
.
.
LCD
LCD
to select the position
LCD buttons
, then press
.
Deleting signals registered with the
learning function
1
RC SETUP
Press for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
[LEARNING]
Press .
3
[ERASE LEARN]
Press .
4
NEXT
Press twice.
5
At the "Source Device" screen, press the
LCD button
for the device you want to
delete.
6
At the "Select Key" screen, press the button
for the learning function you want to erase.
7
[YES]
To delete, press .
If you do not want to delete, press
b Press [NO] to end, [YES] to continue.
[NO]
.