Operations Using Nodes; Adding Nodes (1 ); Adding Nodes - Denon RC-7000CI - Remote Control - Infrared/radio Owner's Manual

,
ENGLISH
LCD button
RC SETUP ----;---~
About the button names in these explanations
[ I :
LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit
Operations using nodes
Adding nodes (1)
Use this procedure to register a node number and add an
RC-7001 RCI (sold separatelyl to the network.
1 -
Press
RC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
Press
NEXT
twice, then press
[NETWORK].
3
Press
[ADD NODES].
4
Press
NEXT.
5
To add the remote control unit to the
network, press
[REMOTE].
6
Press
RESET/CONFIG
on the RC-7001RCI
(sold separately) for about 1 second.
The indicator flashes green.
7
Press
NEXT
twice.
"Success!" is displayed when the device has been
added successfully.
*
Press NEXT to return to the settings menu.
Adding nodes (2)
Use this procedure to add a second or more units of the
RC-70001CI (sold separately) to the network.
Press
RESET/CONFIG
on the RC-7001 RCI (sold separately) for at
least 10 seconds so that the indicator lights red.
1
Press
RC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
Press
NEXT
twice, then press
[NETWORK].
3
Press
[ADD NODES].
4
Press
NEXT.
5
To add the RC-7001RCI to the network,
press
[OTHER].
6
Press
RESET/CONFIG
on the RC·7001RCI
(sold separately) for about 1 second.
The indicator flashes red.
7
Press
NEXT
twice.
"Success!" is displayed when the device has been
added successfully.
*
Press
NEXT
to return to the settings menu.
23