Editing Buttons - Denon RC-7000CI Owner's Manual

Setting the remote control code transmission
mode (In the case of RF)
1
RC SETUP
Press for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
NEXT [EDIT DEVICE]
Press , then press
3
NEXT
Press .
4
[IR/RF]
Press .
5
NEXT
Press .
6
At the "Select Device" screen, press the
button
for the device whose transmission
mode you want to change.
7
NEXT
Press .
8
[RF] [YES]
Press , then press .
[RF] :
The codes are sent as radio waves.
b The setting at "Adding nodes" (vpage 23) must be
made in order to add [RF].
9
NEXT
Press .
b When [RF] is selected, the RC-7001RCI (sold separately)
node number is displayed. Press LCD button.
10
[YES]
Press .
The transmission mode is set.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
.
Changing the device name
1
RC SETUP
Press for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
NEXT
Press , then press
3
[DEVICE NAME]
Press
4
LCD
At the "Select Device" screen, press the
button
for the device (equipment) whose
name you want to change.
5
NEXT
Press .
6
At the "Edit Text" screen, use the first
LCD buttons
column of
of the character to be edited.
7
Select the character to be input with the
LCD buttons
second column of
[SELECT]
.
b Lower case letters are input when [CAPS] is displayed,
capital letters when [lower] is displayed.
Up to 12 characters can be input.
8
[SAVE]
Press .
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].

Editing buttons

Use this procedure to move, copy and insert buttons.
Moving or swapping buttons
1
Press
The "PROGRAM DEVICE" menu is displayed.
2
Press
3
[EDIT TEXT]
Press
.
4
. Press
5
LCD
At the "Source Device" screen, press the
LCD button
want to move.
6
At the "Select Key" screen, press the
button of the button you want to move.
7
Press
to select the position
8
At the "Target Device" screen, press the
LCD button
, then press
or the button to be swapped.
9
At the "Select key" screen, press the
button
be swapped.
10
Press
The button moves or is replaced.
b When [NO] is pressed, the setting menu reappears. To
continue, press [YES].
RC SETUP
for 3 seconds.
NEXT [EDIT FUNC]
, then press .
[MOVE/SWAP]
.
NEXT
.
for the device of the button you
NEXT
.
of the device for the destination
for the destination or the button to
[YES]
.
LCD
LCD