Deleting Signals Registered With The Learning Function - Denon RC-7000CI - Remote Control - Infrared/radio Owner's Manual

ENGLISH
RC SETUP
~
Deleting signals registered with the
learning function
7
To delete, press
[YES].
H you do not want to delete, press
[NO].
1
Press
RC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
4
Press
NEXT
twice.
2
Press
[LEARNING].
3
Press
[ERASE LEARN].
6
At the "Select Key" screen, press the button
for the learning function you want to erase.
5
At the "Source Device" screen, press the
LCD button
for the device you want to
delete.
Changing the button name
7
At the "Edit Text" screen, use the first
column of
LCD buttons
to select the position
of the character to be edited.
3
Press
[KEY NAME].
1
Press
RC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed,
2
Press
NEXT,
then press
[EDIT TEm.
6
Press
NEXT.
4
At the "Select Device" screen, press the
LCD
button
for the device whose button name
you want to change.
5
At the "Select key" screen, select the
LCD
button
for the button whose button name
you want to change.
LCD button
~
-',
.~
'"
r
:~
About the button names in these explanations
[ I :
LCD buttons for selection items
Button name only:
Indica18s a button on the remote control unit
8
Select the character to be input with the
second column of
LCD buttons,
then press
[SELECn.
*
Press [NO) to end, [YES) to continue.
*
Lower case letters are input when [CAPS) is displayed,
capital letters when [lower) is displayed.
Up to 12 characters can be input.
9
Press
[SAVE].
*
When [NO) is pressed, the setting menu reappears. To
continue, press [YES).
18