Editing Buttons - Denon RC-7000CI - Remote Control - Infrared/radio Owner's Manual

ENGLISH
Setting the remote control code transmission
mode (In the case of RF)
1
Press
HC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
Press
NEXT,
then press
[EDIT DEVICE].
3
Press
NEXT•.
4
Press
lIRjHF].
5
Press
NEXT.
6
At the "Select Device" screen, press the
LCD
button
for the device whose transmission
mode you want to change.
7
Press
NEXT.
8
Press
[HF],
then press
[YES].
[RF] :
The codes are sent as radio waves.
9
Press
NEXT.
*
When [RF] is selected, the RC-7001 RCI (sold separately)
node number is displayed. Press LCD button.
*
The setting at "Adding nodes" (!3rpage 23) must be
made in order to add [RF].
1~~~~~~n
mode is set.
*
When
[NO) is pressed, the setting menu reappears. To
continue, press (YES].
Changing the device name
1
Press
HC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
Press
NEXT,
then press
[EDIT TEXT].
3
Press
[DEVICE NAME].
4
At the "Select Device" screen, press the
LCD
button
for the device (equipment) whose
name you want to change.
5
Press
NEXT.
6
At the "Edit Text" screen, use the first
column of
LCD buttons
to select the position
of the character to be edited.
7
Select the character to be input with the
second column of
LCD buttons,
then press
[SELECT].
*
Lower case letters are input when [CAPS) is displayed,
capital letters when [lower) is displayed.
Up to 12 characters can be input.
8
Press
[SAVE].
*
When
[NO) is pressed, the setting menu reappears. To
continue, press (YES].
Editing buttons
Use this procedure to move, copy and insert buttons.
Moving or swapping buttons
1
Press
HC SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2
Press
NEXT,
then press
[EDIT FUNC].
3
Press
[MOVE/SWAP].
4
Press
NEXT.
5
At the "Source Device" screen, press the
LCD button
for the device of the button you
want to move.
6
At the "Select Key" screen, press the
LCD
button of the button you want
to move.
7
Press
NEXT.
8
At the "Target Device" screen, press the
LCD button
of the device for the destination
or the button to be swapped.
9
At the "Select key" screen, press the
LCD
button
for the destination or the button to
be swapped.
1
/\Press
[YES].
UThe button moves or is replaced.
*
When [NO) is pressed, the setting menu reappears. To
continue, press (YES].
15