Starting The Srx Controller - Sony SRX-S105 Operating Instructions Manual

Starting the SRX
Controller

Starting the SRX Controller

Double-click the icon for the SRX Controller in the
desktop window of the computer.
The SRX Controller starts and the Browser Screen is
displayed.
Note when starting the SRX Controller
When the Operating System of the computer is Windows
XP SP2 or later, or any commercially available firewall
software is installed in your computer, the following may
occur. In these cases, unblock the Windows firewall
following the procedures below.
For Windows XP SP2 or later
If the dialog shown below appears when the SRX
Controller is started, select "Unblock." When the dialog
does not appear but the computer does not access the
projector, start "Windows Firewall" from "Control Panel,"
and then add "SRX Controller" to the list in the
"Exceptions" tab.
For commercially available firewall software
Add "SRX Controller" to the Exceptions list, referring to
the operating instructions supplied with the software.
About the Browser Screen
1 1 2 2 3 3
a Menu bar
File
Select "Quit" from the File menu to exit the SRX
Controller.
Connect
Selects the connection mode between the projector and the
computer for controlling the projector.
For details, see "Changing the Connection Mode" on
page 18.
Help
Select "Version" from the Help menu to display the
version information of the SRX Controller.
b Select button
Selecting the projector displayed in the projector detect
window and then clicking this button opens the Control
Function Menu window of the selected projector.
c Refresh button
Updates all of information on the projectors displayed in
the projector detect window.
d EMERGENCY STANDBY 1 button
Clicking the button makes the projectors indicated by
"Connectable" under "Connection" in the projector detect
window enter standby mode. The fans continue to run.
e Projector detect window
Information on all of the projectors connected to a network
is displayed.
The following information is shown:
Alert: Shows whether there is any warning information on
the projector or not. (x: Yes, s: No)
Model Name: Model name of the projector
Serial No.: Serial number of the projector
4 4 5 5
Starting the SRX Controller
17