Remote Commander - Sony SRX-S105 Operating Instructions Manual

f Window select buttons
Open the window with the items you want to set or adjust.
g Adjustment/setting window
Clicking the window select button switches the window
for the adjustment and setting.
The "PICTURE CONTROL," "COLOR/FRAME" and
"INSTALLATION" windows can be displayed.
For details on each window, see "Adjustments and
Settings Using the SRX Controller" on page 25.
SCREEN CONTROL window
1 1 2 2 3 3
a Screen mode buttons
Select single-, dual- or quad-screen mode for multiple
display mode. Click
for quad mode.
b CUT OFF "ON/OFF" buttons
Click the ON button to cut off the picture momentarily.
Click the OFF button to restore the picture.
The SCREEN CONTROL window changes depending on
the screen mode selected with the screen mode button (1).
When dual- or quad-screen mode is selected, the buttons
function independently on each divided screen.
c Input signal select drop-down list box
Selects the input signal you want to project on the screen.
The SCREEN CONTROL window changes depending on
the screen mode selected with the screen mode button (1).
When dual- or quad-screen mode is selected, you can
select the input independently on each divided screen.
INPUT A: Selects the signal input from the DVI-D
connectors on INPUT A.
INPUT B: Selects the signal input from the connectors on
the optional input board installed in the INPUT B
section.
INPUT C: Selects the signal input from the connectors on
the optional input board installed in the INPUT C
section.
INPUT D: Selects the signal input from the connectors on
the optional input board installed in the INPUT D
section.
10
Location and Function of Controls
4 4
for single, for dual and
d MUTING ON/OFF buttons
Clicking the ON button cuts off the whole picture on the
screen momentarily. Click the OFF button to restore the
picture. Activating the muting function blocks off lamp
light completely by use of a shutter, and displays the black
signal on the whole screen.
e OSD ON/OFF buttons
Click the OFF button to eliminate the on-screen display.
Click the ON button to display it on the screen.
The setting using the buttons also functions when you
operate the projector with the Remote Commander.

Remote Commander

5 5
1
2
3
4
5
6
7
8
a ?/1 (power on/standby) buttons
?: Press to turn on the projector.
1: Press to make the projector enter standby mode.
b SCREEN MODE button
Selects single-, dual- or quad-screen. Each press of the
button changes the mode, 1 (single), 2 (dual) and 4 (quad),
in this order.
c MUTING button
Press to cut off the whole picture on the screen. Press it
again to restore the picture. Activating the muting function
SCREEN 1 I
MODE
MUTING
1 2 4
FUNCTION
1 2 3
INPUT SEL
A B C D
PICTURE CONT
+ + +
CONTR BRIGHT SHARP
– – –
SCREEN SEL
1 2
3 4
LENS CONT
+ + +
FOCUS ZOOM SHIFT
– – –
SR Projector
RM-PJ4K
IR