Display Option Menu; Color Matching; Color Correction; Contrast Mode - Panasonic PT-D5000ELS Functional Instructions

DISPLAY OPTION menu

Remote control
See "Navigating through the menu" on page 15.
See "Main menu and Sub-menu" on page 12.

COLOR MATCHING

(Not available for PT-D5000)
When multiple projectors are used simultaneously, you can
adjust the difference of the colours. Press I H to cycle
through the options.
OFF Deactive.
Adjusting RGB gain of RED, GREEN, BLUE
and WHITE. Press I H to change the value
and switch ON/OFF the AUTO TEST
3 COLORS
PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)
Adjusting RGB gain of RED, GREEN,
BLUE, CYAN, MAGENTA, YELLOW and
WHITE. Press I H to change the value and
7 COLORS
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)
Adjusting colours based on measured
values using colorimeter. Input measured
result in MEASURED DATA, and adjust in
TARGET DATA. Press I H to change the
MEASURED value and switch ON/OFF the AUTO TEST
PATTERN.
PICTURE MODE in PICTURE menu
need to be set to DYNAMIC for using
colorimeter.
NOTE:
• If the TARGET DATA is outside the colour range of the
projector, the colours will not be projected correctly.
• When each colour option is selected while AUTO TEST
PATTERN is activated, its one colour pattern will be displayed.
• Adjusting red gain of red colour changes its luminance, and
likewise blue gain of blue and green gain of green.
• COLOR MATCHING adjustment should be carried out by a
person who is familiar with the projector or by a service person
because a high level of skill is required to make successful
adjustment.
• Press the DEFAULT button to restore the factory default
settings.
• AI, COLOR CORRECTION and COLOR TEMPERATURE are
not available with COLOR MATCHING.

COLOR CORRECTION

You can adjust 6 colours and register the result for each of 4
types of signals, VIDEO, S-VIDEO, RGB and YP
OFF Deactive
Adjust 6 colours, RED, GREEN,
USER BLUE, CYAN, MAGENTA and
YELLOW.

CONTRAST MODE

(Not available for PT-D5000)
You can switch the contrast mode for operating environment.
NORMAL Maximum brightness
HIGH Maximum contrast

SCREEN SETTING

SCREEN FORMAT

Select the required screen format by pressing I H. The
SCREEN FORMAT setting will affect on the ASPECT
setting. See "ASPECT" on page 18.
PT-DZ6710/PT-DZ6700
16:10
PT-DW6300
16:10
PT-D6000/PT-D5000
4:3
*1. SCREEN POSITION is not available.

SCREEN POSITION

You can change the displaying position of the projecting
area. Press I H to adjust the value.
Setting range:
16:10
PT-DZ6710/PT-DZ6700
16:9
4:3
Setting range:
PT-DW6300 16:10
16:9
Setting range:
PT-D6000/PT-D5000 4:3
16:9

AUTO SIGNAL

You can turn ON/OFF automatically detecting system of the
AUTO SETUP feature.
Only when the AUTO SETUP button is
OFF pressed, the projected image position
will be adjusted.
When the projector detects a
ON COMPUTER or DVI signal, adjust the
projected image position automatically.
P /YC C
B R B
*1
H 16:9 H 4:3
*1
H 16:9
*1
H 16:9
Not available.
-60 to +60
-160 to +160
Not available.
-40 to +40
Not available.
-96 to +96
E
NGLISH - 25
.
R