Navigating Through The Menu - Panasonic PT-D5000ELS Functional Instructions

Navigating through the menu

Displaying the main menu
Press the MENU button to display the main menu.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
Adjusting with the bar scale
items
The triangle mark under the bar indicates factory default
setting and the square indicates the current setting.
CONTRAST
ADJUST
Returning to the previous menu
Press the MENU button to return to the previous menu.
Press repeatedly to escape from the menu mode and
return to the projection.
NOTE:
• See "INITIALIZE" on page 31 to reset the settings.
Current setting
0
Default
Operating procedure
1. Press F G to scroll to the required main menu item and
press the ENTER button to select.
The selected item is highlighted in orange and the sub-
menu is displayed.
See "Main menu and Sub-menu" on page 12.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
2. Press F G to scroll to the required sub-menu item and
press I H or the ENTER button to adjust.
The selected item is called up and the other menu items
disappear from the screen. Called up item will be disappear
after 5 seconds and return to the menu mode.
If there is a lower level, the next level will be displayed.
You can reset some setting values to factory default by
pressing the DEFAULT button.
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
GEOMETRY
MENU SELECT
CHANGE
ENTER
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by pressing I
H.
CONTRAST
ADJUST
4. Press the MENU button to return to the previous menu.
Menu Navigation
AUTO
0
KEYSTONE
0
E
NGLISH - 15