Advertisement
Table of Contents
- 1 Table of Contents
- 2 Fill out Program Schedule Sheet
- 3 Select Watering Schedule
- 4 Set the Current Time
- 5 Set the Current Day
- 6 Select the Program (a or B)
- 7 Set Station Watering Days
- 8 (Custom Schedule Only)
- 9 Set Station Run Times
- 10 Set Watering Start Times
- 11 Set Controller to Automatic Operation
- Download this manual
INTRODUCTION
Congratulations on purchasing a Rain Bird ESP solid state controller. This manual describes how to in-
stall, operate, and maintain your controller. Please read these instructions carefully. For your conve-
nience, we have included a Quick Reference Guide below, so you can quickly find instructions for com-
mon tasks.
Quick Reference Guide
If you want to:
¨
Change the time of day............................
¨
Turn the controller off and on
(for example, because of rain)..................
¨
Adjust watering times for all stations
(for example, during a hot or cool period)...
¨
Start the sprinkler system manually..........
¨
Run the test program...............................
¨
Install a new battery................................
¨
Troubleshoot a controller problem.............
Technical Support: 1-800-RAIN BIRD
R R
AIN
AIN
PREFERRED BY PROFESSIONALS WORLDWIDE
page 4
page 8
page 9
page 9
page 10
page 14
page 14
1
B B
IRD
IRD
®
Installation,
Programming,
& Operation
ESP-4
ESP-6
ESP-8
Advertisement
Table of Contents
Related Manuals for Rain Bird ESP-6
Summarization of Contents
Introduction to ESP Controller
Quick Reference Guide
A guide to quickly finding instructions for common tasks.
Controller Stations Explained
Sample Station Layout Diagram
Illustrates a typical wiring layout for the controller and sprinklers.
Controls and Switches Overview
Details the various buttons, display, and dial on the ESP controller.
Programming the Controller
Controller Programming Checklist
A step-by-step list of tasks for initial controller programming.
Fill Out Program Schedule Sheet
Instructions on completing the schedule sheet before programming.
Set Current Day
Custom Schedule Day Setting
How to set watering days when using a custom schedule.
Fixed Schedule Day Setting
How to set the current day for a fixed watering schedule.
Operating the Controller
Turn Controller On and Off
Steps to set the controller to AUTO or OFF mode.
Installing the Controller
Select Installation Location
Guidance on choosing the optimal mounting site for the controller.
Mount Controller Hardware
Instructions for securing the controller to a wall or stud.
Connect Field Wiring
Station Valve Wiring
Procedure for connecting individual station valve wires.
Master Valve / Pump Start Relay Wiring
How to wire a master valve or pump start relay.
Need help?
Do you have a question about the ESP-6 and is the answer not in the manual?
Questions and answers