Table of Contents
Advertisement
Right choice for ultimate yield
LSIS strives to maximize customers' profit in gratitude of choosing us for your partner.
Programmable Logic Controller
XGB Ethernet/IP IF Module
XGT Series
Read this manual carefully before
installing, wiring, operating, servicing
or inspecting this equipment.
Keep this manual within easy reach
for quick reference.
User's Manual
XBL-EIPT
http://www.lsis.com
Advertisement
Table of Contents
Related Manuals for LSIS XG5000
Summarization of Contents
Safety Instructions
Safety Instructions for Design Process
Guidelines and warnings for designing safe PLC systems.
Safety Instructions for Installation Process
Precautions for safe installation and module handling of the equipment.
Safety Instructions for Wiring Process
Warnings and guidance for correct and safe wiring procedures.
Safety Instructions for Test-Operation and Maintenance
Safety measures for product operation, testing, and maintenance.
Safety Instructions for Waste Disposal
Proper procedures for handling and disposing of product and battery waste.
Chapter 1: Product Overview
1.1 Product Overview
Introduction to the EtherNet/IP I/F Module and its network capabilities.
1.2 Product Features
Detailed list of key features and functionalities of the module.
1.3 Product Components
Identification and description of the module's type names.
1.4 Software for Using Products
Information on programming tools and software required for the module.
1.5 Compatibility by OS Version
Details on OS version compatibility for Tag communication.
Chapter 2: Specifications
2.1 General Specifications
Environmental and physical specifications of the XGT series.
2.2 Performance Specifications
Technical performance metrics for system configuration and media.
2.3 Name of Each Part
Identification of module components, including LED indicators and connectors.
2.4 Cable Standards
Classification and specifications for UTP cables used with the module.
Chapter 3: Installation and Trial-Run
3.1 Installation Environment
Recommended environmental conditions for system installation.
3.2 Cautions when Handling
Important precautions and warnings during module handling and installation.
3.3 Order for Setting up Products
Step-by-step procedure for installing and configuring the system.
3.4 Available Device Area
Overview of available device areas for different CPU types.
3.5 Installation of Products
Specific instructions for installing the XBL-EIPT module.
3.6 Trial-Run
Guidelines for performing trial runs and system configuration checks.
Chapter 4: System Configuration
4.1 Usable System Configurations
Examples of valid system configurations with and without a switch.
4.2 Unusable System Configurations
Examples of system configurations that are not supported or may cause issues.
Chapter 5: Software and Communication Setup
5.1 Software Installation and Execution
Steps for installing and running the XG5000 software.
5.2 Registering Communication Modules
Procedures for registering communication modules in XG5000, online and offline.
Chapter 6: EIP Service
6.1 EtherNet/IP Communication Methods
Explanation of Implicit and Explicit communication methods.
6.2 EIP Service Overview
Overview of EIP service types and usage methods.
6.3 Tag Setup
Procedures for setting up tags for XBC/XBM and XEC devices.
6.4 Periodic/Non-periodic Communication Setup
Detailed steps for configuring periodic and non-periodic communication services.
6.5 Examples
Practical examples of communication setup with other modules.
Chapter 7: Diagnosis and Troubleshooting
7.1 System Diagnosis
Method for checking the state of the EtherNet/IP I/F Module and systems.
7.2 System Diagnosis Items and Contents
Detailed breakdown of diagnosis items and how to check them.
7.3 Troubleshooting
Procedures for identifying and resolving failures and errors.
7.4 Remote Communication Control
Functionality and procedures for remote access and control of PLCs.
Appendix
A.1 Terms and Definitions
Glossary of technical terms and network protocols used in the manual.
A.2 Flag List
Lists of special relays (F) and network registers (N) with their functions.
A.3 External Dimension
Physical dimensions and outline of the XBL-EIPT module.
A.4 OS Version Change Actions
Steps and considerations for changing the OS version from V1.x to V2.0.
Need help?
Do you have a question about the XG5000 and is the answer not in the manual?
Questions and answers