Advanced Setup Menu - HP L1744A User Manual

4. Advanced Setup Menu

FUNCTION
Projector
position
Power
timeout
Scan inputs
Language
Password
Change
password
DESCRIPTION
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors.
Table front: Select this setting
with the projector set on the
floor and audience viewing the
projected images from the
front side of the screen. This is
the most common setting.
Ceiling front: Select this set-
ting with the projector sus-
pended from the ceiling and
audience viewing the pro-
jected images from the front
side.
Table rear: Select this setting
when the projector is placed
near the floor and behind the
screen. A special rear projec-
tion screen is required.
Ceiling rear: Select this setting
when the projector is sus-
pended from the ceiling and
placed behind the screen. A
special rear projection screen
is required.
Determines the length of time before the projector will automati-
cally shut down when the picture is hidden.
Sets whether the projector searches automatically for input signals.
If scanning is on, the projector will scan for input signals in the fol-
lowing order: VGA/YPbPr --> Composite-video --> S-Video until it
acquires a signal. If the function is not activated, the projector
selects the last input signal.
Sets the language for the on-screen menus.
Sets whether a password is required to turn on the projector.
Sets or changes the current password.
5. Operation 29