Setup Menu - HP xp7010/xp7030 User Manual

Setup menu

Setup menu
Keystone
Reset keystone
Volume
Mute
Projector position
Lamp saver
Language...
Hide
Advanced setup...
Power timeout
Clean edges
Timeout for menu
Horizontal size
Reset lamp hours
Projector lock...
Reset all settings
Corrects the slanted sides of the picture. This compensates for a projector
that is too high or low relative to the screen.
Resets the keystone correction to zero (no correction).
Adjusts the loudness of the projector's audio (certain models only).
Temporarily turns off the projector's audio (certain models only).
Adjusts the picture to match the orientation of the projector: upright or
upside-down, in front of or behind the screen. Inverts or reverses the image
accordingly.
Sets a lower power level for the lamp.
Selects the language used by the on-screen menu.
Hides the picture and mutes the sound.
Adjusts additional setup settings.
Sets the length of time the projector waits for an input signal before
automatically shutting down.
Enlarges and clips video images to remove noise from picture edges.
Sets how many seconds the on-screen menu waits for input before it closes.
Fine-tunes the width of the image for multi-projector setups.
For a new lamp, resets the hours of use.
Sets or cancels a secret button sequence that must be entered for the
projector to operate.
Restores all menu settings to factory default settings.
Using the on-screen menu 35