Setup Menu; Help Menu - HP mp2220 Series User Manual

Picture menu (continued)
Aspect ratio
Reset this picture mode Restores the current picture mode to its default settings.

Setup menu

Setup menu
Language
Timeout for menu
Picture orientation
Lamp saver
Power timeout
Clean edges
Reset lamp hours
Reset all settings

Help menu

Help
Diagnostics...
Selects how the picture fits on the screen:
•
Best fit automatically fits the picture without stretching it.
•
1-to-1 shows each picture dot as one projected dot.
•
Reduced fits a standard-shape picture onto a widescreen projection
screen.
•
Fill Fill stretches the picture to fill the screen. Fill Fill
Selects the language used by the on-screen menu.
Sets how many seconds the on-screen menu waits for input before it closes.
Adjusts the orientation of the picture: upright or upside-down, in front of or
behind the screen. Inverts or reverses the image accordingly.
Sets a lower power level for the lamp.
Sets the length of time the projector waits for an input signal before
automatically shutting down.
Removes visible noise from the edges of the picture.
For a new lamp, resets the hours of use.
Restores all menu settings to factory default settings.
Displays information and status of the projector.
Show tests for checking the operation of the projector and the remote
control.
Using the on-screen menu 39