3. Installation
Choosing a Location
Your projector is designed to be installed in the four installation configurations
shown here. Your room layout or personal preference will dictate which installation
configuration you use.
I. Table front
III. Table rear
For further information on the four configurations, please refer to page 29.
If you place the projector above or below the screen, you have to tilt it down or up to
center the image on the screen, in these situations image distortion will occur. Use
the Keystone function to correct the distortion. See page
14
3. Installation
II. Ceiling front
IV. Ceiling rear
22
for keystone correction.