Indicators
Power indicator
Off
Flashing The projector is warming up or cooling down.
On
Lamp indicator
Off
On
Temperature indicator
Off
Flashing The fans are not working, and the projector will shut down. Contact HP
On
Updating the firmware
HP may periodically release updated versions of the projector firmware to enhance
the projector performance. The projector firmware version is shown in the on-
screen menu in the Information menu. Check for updated versions at http://
www.hp.com/go/proj_firmware.
1.
On a computer with a USB port, go to the HP projector upgrade website (see
introduction for this section) and download the latest file intended for a USB
upgrade.
2.
Connect the USB cable between the USB port on the projector and the USB
port on the computer.
3.
On the computer, run the file you downloaded by double-clicking the file. Fol-
low the on-screen instructions.
34
6. Maintenance
The projector is off.
The projector is on and operating normally.
The projector is operating normally.
The lamp is bad or has reached the end of its life.
The projector is operating normally.
about repairs.
The internal temperature is too high, and the projector will shut down.
Allow the projector to cool down. If this continues, contact HP about
repairs.