Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Mindray DPM 7
Summarization of Contents
Patient Setup
Enter Demographics
Allows the clinician to enter and modify patient demographics.
Adjust Patient Size
Allows the clinician to adjust patient size (Adult, Pediatric, Neonate).
Discharge A Patient
Clears patient information and restores default settings.
Standby
Enter Standby
Suspends monitoring on a patient; data and settings are preserved.
Resume Monitoring
Removes the patient from Standby and resumes monitoring.
Record
Real-Time Waveforms
Records a strip on the patient at the monitor's integrated recorder.
Adjust Recorder's Waveforms
Adjusts the waveforms recorded on a patient's integrated recorder.
Print
Real-Time Waveforms
Prints a strip on the patient to a predetermined laser printer.
ECG
Adjust ECG Lead
Allows the clinician to adjust the ECG leads viewed on the main display.
Enable Pacemaker Detection And Set Pacemaker Rate
Enables pacemaker detection and allows setting the pacemaker rate.
Initiate Relearn
Initiates manual ECG relearning on the bedside monitor.
Initiate ST Analysis
Initiates ST analysis on the DPM 6 or DPM 7 bedside monitor.
NIBP
Initiate a Non-Invasive Blood Pressure Measurement (NIBP)
Initiates a Non-Invasive Blood Pressure measurement on a patient.
Set a Non-Invasive Blood Pressure Measurement Interval
Sets an interval for automatic NIBP measurements.
Stop NIBP Measurements
Stops current or all NIBP measurements on the monitor.
Invasive Blood Pressures
Adjust Invasive Blood Pressure Label
Adjusts the label for an invasive blood pressure on the bedside monitor.
Zero Invasive Blood Pressure
Zeros an invasive blood pressure transducer on the DPM 6 and DPM 7 monitor.
Alarms
Adjust Alarm Limits
Configures alarm limits and alarm responses for parameters.
Adjust Alarm Responses
Adjusts audio and visual alarm indicators and recording settings.
Adjust Arrhythmia Alarms
Adjusts arrhythmia alarm notification, level, and recording settings.
Disable Non-Lethal Arrhythmias
Disables all arrhythmia alarms except lethal ones.
Silence Alarms
Silences an alarm at the DPM 6/7 bedside monitor for a set time.
Silence All Alarms
Silences all alarms at the DPM 6/7 bedside monitor for a set time.
Transfer
Transfer Patient Data
Transfers patient data between DPM 6/7 bedside monitors using MPM.
Hemodynamic Monitoring
Initiate A Cardiac Output Measurement
Initiates a Cardiac Output (CO) measurement.
Initiate Pulmonary Artery Wedge Pressure (PAWP)
Initiates a Pulmonary Artery Wedge Pressure (PAWP) measurement.
Initiate Hemodynamic Calculations
Performs hemodynamic calculations to determine patient's status.
Screen Display
Screen Selection
Adjusts the main display layout based on patient acuity.
History
Tabular Trends
Displays tabular trends for patient data over time.
Arrhythmia and Alarm Events
Views and prints stored physiological and arrhythmia events.
Full Disclosure
Stores configured waveforms and associated numeric data.
Volumes
Adjust Alarm Volume
Adjusts the alarm volume on the bedside monitors.
Key Volume
Adjusts the key volume on the bedside monitor.
Beat Tone
Adjusts the beat tone (QRS tone) volume.
Date and Time
Adjust Date and Time
Sets the date and time on the bedside monitor.
Parameter Colors
Adjust Parameter Color
Adjusts the color of parameters' numeric and waveform display.
Default (Preset) Settings
Restore Default Settings
Restores default settings on a patient currently being monitored.
Need help?
Do you have a question about the DPM 7 and is the answer not in the manual?
Questions and answers