Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for OHAUS TP2KS
Summarization of Contents
Preface
Selectable Weighing Units
Describes the ability to choose from 12 different weighing units.
RS-232 Interface
Enables communication with printers and computers for data transfer.
Dual Range Operation
Features two operating ranges: fine and coarse for different capacities.
Installation
Environment
Specifies ideal environmental conditions for balance operation to ensure accuracy.
In-Service Cover
Instructions for applying the protective cover with adhesive pads.
Leveling the Balance
How to adjust leveling feet using the indicator for a stable reading.
Installation Components
Draft Shield (Model TP200S)
Instructions for installing the draft shield to prevent air current interference.
Pan and Pan Support
How to install the pan support and place the weighing pan correctly.
Installation Accessories
Round Pan
Instructions for placing the round pan on its support.
Weigh Below Hook
How to install the hook for weighing items below the balance.
AC Adapter
Instructions for connecting the AC adapter for power.
Operation
Turning the Balance ON
Step-by-step guide to power on the balance and initial display checks.
Stabilization
Importance of allowing the balance to warm up for stable readings.
Operation Modes and Features
Auto Range Models (TP400D and TP4KD)
Explains the dual range feature for different capacities and readability.
Checking Calibration
Guidance on verifying the balance's calibration accuracy.
Selecting a Weighing Unit
How to choose and change the unit of measurement displayed.
Parts Counting Operation
Parts Counting
Detailed procedure for using the balance to count identical items.
Parts Counting Features
Parts Counting Alternate Display
Options for displaying count results differently (e.g., NET, TOTAL).
Percent Weighing Operation
Percent Weighing
How to weigh items as a percentage of a reference load.
Percent Weighing Features
Percent Weighing Alternate Display
Options for alternate display modes in percent weighing.
Menu System Overview
Calibration Menu
Used to calibrate the balance for span or linearity.
User Menu
Used to adapt the balance to environmental conditions.
Setup Menu
Used to enable or disable different balance features.
Print Menu
Used to configure the RS232 interface.
Calibration Menu Details
Calibration Menu Protection
How to lock the calibration menu to prevent unauthorized changes.
Calibration Weights
Lists the required weights for accurate calibration procedures.
Calibration Procedures
Span Calibration
Procedure to reset the balance's weighing range using two weight values.
Calibration Procedures
Linearity Calibration
Procedure to minimize deviation between actual and displayed weights.
Calibration Menu Exit
End
Option to exit the Calibration menu and return to normal operations.
User Menu Details
User Menu Protection
How to lock the User menu to prevent unauthorized settings changes.
User Menu Settings
Reset to Factory Defaults
Resets all User menu selections to their original factory settings.
User Menu Settings
Unit Selection
Specifies available weighing units and operating modes.
Taels
Allows selection of one of three different Taels units.
User Menu Settings
Averaging Level
Compensates for vibration/air currents to achieve a stabilized display.
User Menu Settings
Stability Range
Defines how much weight can change before the stability indicator turns off.
Auto-Zero
Minimizes effects of temperature changes on the zero reading.
User Menu Exit
End
Exits the User menu and stores selected settings.
Setup Menu Details
Setup Menu Protection
How to lock the Setup menu to prevent unauthorized changes.
Setup Menu Settings
Reset to Factory Defaults
Resets all Setup menu selections to their original factory defaults.
Unit Selection
Specifies available weighing units and operating modes.
Taels
Allows selection of one of three different Taels units.
Setup Menu Settings
Custom Unit Conversion Factor
Allows creating a custom weighing unit with a conversion factor.
Setup Menu Settings
Parts Counting Error Level
Sets acceptable accuracy levels for parts counting results.
Parts Counting Alternate Display
Specifies alternate display modes for parts counting.
Setup Menu Settings
Percent Weighing Alternate Display
Specifies alternate display modes for percent weighing.
Setup Menu Settings
Lockswitch
Enables locking specific menus to prevent unauthorized access.
List
Outputs a listing of current menu settings via RS232.
End
Exits the Setup menu and stores selections.
Print Menu Details
Print Menu Protection
How to lock the Print menu to prevent unauthorized changes.
Print Menu Settings
Reset to Factory Defaults
Resets all RS232 menu selections to original factory defaults.
Baud Rate
Selects the desired baud rate for RS232 communication.
Data Bits
Sets the number of data bits for RS232 communication.
Print Menu Settings
Auto Print Feature
Enables or disables the automatic output of display data.
Auto Print Time Interval and Non Printing Weight Values
Specifies time intervals or ranges for automatic output.
Print Menu Settings
Print Stable Data Only
Enables/disables printing only stable display data.
Print Numeric Data Only
Selects numeric-only or full display data for RS232 output.
List
Outputs a listing of current Print menu settings via RS232.
End
Exits the Print menu and stores selections.
RS232 Interface
Hardware
Details the 9-pin D connector pinout for RS232 communication.
Output Formats
Describes ways data output can be initiated (PRINT, Auto Print, computer command).
Need help?
Do you have a question about the TP2KS and is the answer not in the manual?
Questions and answers