Table of Contents
Advertisement
NV-series PT
Simple Operation
Handbook
- A case of connection to a CP1E PLC -
The NV3W-V1 is added.
Table of Contents
Preparation
Required Devices 2
Wiring and Connection 4
Turning on the Power 6
Displaying the NV System Menu 7
Setting the CPIE Serial Port 8
Designing Screens
Creating New Screen Data 12
Creating Switch Parts 16
Creating Lamp Parts 19
Creating Data Parts 21
Creating Keyboard Screens 23
Creating Character Stings 26
Connecting with CP1E PLC
Transferring Screen Data 28
Advanced Usage
from CP1E 34
Connecting PC and PLC via NV 35
Advertisement
Table of Contents
Related Manuals for Omron NV3Q-MR21
Summarization of Contents
Preparation
Required Devices
Lists devices required to connect an NV-series PT to a CP1E PLC.
Wiring and Connection
Explains procedures for wiring and connecting the NV3W-V1 (5-VDC type) PT to a CP1E PLC.
Turning on the Power
Details powering up the CP1E and NV, and explains NV startup modes.
Displaying the NV System Menu
Describes how to access and use the NV System Menu for configuration.
Setting the CP1E Serial Port
Guides setting up the RS-232C serial port on the CP1E for NV communication.
Designing Screens
Creating New Screen Data
Guides creating screen data using NV-Designer software for the NV PT.
Setting the NV Communications
Configures NV communication parameters with the CP1E via NV-Designer.
Creating Switch Parts
Procedure for creating switch parts to control PLC bits on the NV screen.
Creating Lamp Parts
How to create lamp parts to visually indicate PLC status.
Creating Data Parts
Steps to create data parts for displaying or inputting PLC data.
Creating Keyboard Screens
Creating custom keyboard screens for data entry on the NV PT.
Creating Character Strings
Adding and formatting text or character strings on NV screens.
Displaying Picture Images on NV Screen
Instructions for pasting bitmap images onto NV screens.
Connecting with CP1E PLC
Transferring Screen Data
Process for transferring screen data from NV-Designer to the NV PT.
Monitoring PLC Parameters with CX-Programmer
Using CX-Programmer's Watch Window to monitor and change PLC parameters.
Checking Operation
Verifying the functionality of parts and screens on the actual NV PT.
Advanced Usage
Switching Screens from CP1E
Controlling NV screen changes from the CP1E PLC via system memory.
Changing Backlight Colors from CP1E
Modifying NV backlight colors using CP1E system memory settings.
Connecting PC and PLC via NV
Establishing PC-PLC connection through the NV for program transfer.
Need help?
Do you have a question about the NV3Q-MR21 and is the answer not in the manual?
Questions and answers