Table of Contents
Advertisement
NV-series PT
Simple Operation
Handbook
- A case of connection to a CP1E PLC -
The NV3W-V1 is added.
Table of Contents
Preparation
Required Devices 2
Wiring and Connection 4
Turning on the Power 6
Displaying the NV System Menu 7
Setting the CPIE Serial Port 8
Designing Screens
Creating New Screen Data 12
Creating Switch Parts 16
Creating Lamp Parts 19
Creating Data Parts 21
Creating Keyboard Screens 23
Creating Character Stings 26
Connecting with CP1E PLC
Transferring Screen Data 28
Advanced Usage
from CP1E 34
Connecting PC and PLC via NV 35
Advertisement
Table of Contents
Related Manuals for Omron NV3Q-SW21
Summarization of Contents
Preparation
Required Devices
Lists devices needed to connect an NV-series PT to a CP1E PLC.
NV-PC Connection Cables
Details connecting NV series PTs to a PC using USB cables.
Wiring and Connection Procedures
Explains connecting NV3W-V1 PT to CP1E PLC, including power and cable connections.
Powering On and Startup Modes
Guides on turning on power to the CP1E/NV and managing NV startup modes.
NV System Menu Navigation
Details accessing and navigating the NV System Menu for configuration settings.
Setting CP1E Serial Port for Communication
Explains setting serial port communications between NV and CP1E using CX-Programmer.
Designing Screens
Creating New Screen Data
Guides on creating new screen data using NV-Designer software for the PT.
Configuring NV-CP1E Communications
Details setting NV-CP1E communication parameters via NV-Designer.
Creating Switch Parts
Explains creating switch parts on the screen and setting their PLC functions.
Creating Lamp Parts
Guides on creating lamp parts and setting their ON/OFF bit control in the PLC.
Creating Data Parts for Display and Input
Describes creating data parts to display PLC values and enable user input.
Creating Keyboard Screens
Instructions for creating dedicated keyboard screens for data input.
Creating Character Strings and Text
Details creating and formatting text or character strings on the NV screen.
Displaying Picture Images on NV Screen
Explains how to paste bitmap images from the clipboard onto NV screens.
Connecting with CP1E PLC
Transferring Screen Data to NV
Details the process of transferring created screen data from NV-Designer to the NV.
Monitoring and Changing PLC Parameters
Explains using CX-Programmer's Watch Window to monitor and change PLC addresses.
Checking Part Operation
Guides on checking the operational status of switches, lamps, and data parts on the NV.
Advanced Usage
Switching NV Screens from CP1E
Describes how to switch NV screens remotely from the CP1E PLC using system memory.
Changing NV Backlight Colors from CP1E
Details changing NV backlight colors remotely from the CP1E via system memory.
Connecting PC and PLC via NV Interface
Explains connecting PC and PLC through the NV for program transfer and monitoring.
Need help?
Do you have a question about the NV3Q-SW21 and is the answer not in the manual?
Questions and answers