Advertisement
Quick Links
Find Quality Products Online at:
INSTRUCTION MANUAL
ALUMINUM SITE-RITE
HAND BENDERS
840A, 841A, 842A, 843A,
840AH, 841AH and 842AH
AND
IRON SITE-RITE
HAND BENDERS
®
840F, 841F, 842F, 843F,
840FH, 841FH, and 842FH
Read and understand this material
before operating or servicing this
equipment. Failure to understand how to
safely operate this tool could result in an
accident causing serious injury or death.
52034125
© 2008 Greenlee Textron Inc.
GlobalTestSupply
www.
®
4/08
.com
sales@GlobalTestSupply.com
Advertisement
Related Manuals for Greenlee SITE-RITE 841FH
Summarization of Contents
Aluminum and Iron Site-Rite Hand Benders
Description and Purpose
Overview of the Greenlee SITE-RITE® Hand Benders and the manual's purpose for safe operation.
General Safety Cautions
Crucial warnings on understanding instructions, tool inspection, and intended use to prevent injury or property damage.
Bending Handle Up Procedure
Step-by-step instructions for bending conduit with the handle in the 'up' position, focusing on alignment and pressure.
Bending Handle Down Procedure
Detailed steps for bending conduit with the handle in the 'down' position, covering positioning and stopping criteria.
Bending Tips and Best Practices
Practical advice for bending, including plane alignment, conduit size considerations, and optimal working positions.
Marking Conduit for 90° Stubs
Procedure for accurately marking conduit for precise 90-degree stub bends, including deduct length calculations.
Correcting Overbends
Method to adjust conduit bent beyond the desired angle using the bender handle for correction.
Back-to-Back 90° Stubs
Technique for creating two consecutive 90-degree bends on a conduit, ensuring proper alignment.
Offset Bends Overview
Explanation of offset bends to reroute conduit around obstructions, including angles and measurement tables.
Working Past Obstructions
Guidance on calculating and executing bends to navigate around obstacles, utilizing offset tables.
Working Toward Obstructions
Instructions and tables for compensating for conduit shrinkage when bending towards an obstruction.
3-Bend Saddles
Procedure for creating three-bend saddles to avoid obstructions, with specific tables for 45-degree bends.
Need help?
Do you have a question about the SITE-RITE 841FH and is the answer not in the manual?
Questions and answers