Advertisement
Quick Links
Find Quality Products Online at:
INSTRUCTION MANUAL
ALUMINUM SITE-RITE
HAND BENDERS
840A, 841A, 842A, 843A,
840AH, 841AH and 842AH
AND
IRON SITE-RITE
HAND BENDERS
®
840F, 841F, 842F, 843F,
840FH, 841FH, and 842FH
Read and understand this material
before operating or servicing this
equipment. Failure to understand how to
safely operate this tool could result in an
accident causing serious injury or death.
52034125
© 2008 Greenlee Textron Inc.
GlobalTestSupply
www.
®
4/08
.com
sales@GlobalTestSupply.com
Advertisement
Related Manuals for Greenlee SITE-RITE 840FH
Summarization of Contents
Greenlee SITE-RITE
® Hand Benders Manual
Product Description and Purpose
Overview of the benders and the manual's intent to familiarize operators with safe operation.
General Safety Precautions
Mandatory reading of instructions, tool inspection, and intended use to prevent injury or damage.
Bending Procedures
Bending with Handle Up
Detailed steps for bending conduit using the bender's handle in the upward position.
Bending with Handle Down
Detailed steps for bending conduit using the bender's handle in the downward position.
Marking for 90
° Stubs
Procedure for marking conduit to create accurate 90-degree stubs using deduct lengths.
Correcting Overbends
Steps to adjust conduit that has been bent beyond the intended angle.
Back-to-Back 90
° Stubs
Technique for creating two consecutive 90-degree bends in conduit.
Offset Bends
Working Past an Obstruction
How to bend conduit to navigate around obstacles using offset bends and determining center-to-center distance.
Working Toward an Obstruction
Techniques for compensating conduit shrinkage when bending towards obstructions using offset tables.
3-Bend Saddles
3-Bend Saddle Procedure
Detailed steps and table for creating 3-bend saddles to avoid obstructions, including shrinkage calculation.
Need help?
Do you have a question about the SITE-RITE 840FH and is the answer not in the manual?
Questions and answers