Table of Contents
Advertisement
Quick Links
SERVICE MANUAL
SECURITY FUNCTION
367/287/227
This Service Manual (Ver. 1.02) describes
bizhub 367/bizhub 287/bizhub 227/bizhub 136DN/bizhub 128DN/
bizhub 122DN/ineo 367/ineo 287/ineo 227/Sindoh N502/
Sindoh N501/Sindoh N500/Sindoh MF3091/Sindoh MF2101/
Sindoh MF2041/Sindoh N512/Sindoh N511/Sindoh N510/
Sindoh N517/Sindoh N516/Sindoh N515
(Version: G00-27)
2016. 3
Ver. 1.02
Advertisement
Table of Contents
Related Manuals for Konica Minolta ineo 287
Summarization of Contents
Installation of the machine and steps to be performed before operation
Unpacking and setting up the machine
Covers the procedures for unpacking and setting up the machine before performing security mode.
Removing the machine
Instructions for safely removing the machine from its packaging and initial handling.
Removing protective tape, packing and other shipping materials
Details the process of removing protective tapes and packing materials.
Installing the toner cartridge
Step-by-step guide for installing the toner cartridge.
Installing and replacing the hard disk
Procedures for installing or replacing the hard disk drive.
Installing other options
Refers to separate manuals for installing additional machine options.
Mounting the accessory parts
Instructions for mounting accessory parts like the stylus pen and connector cover.
Connecting the power cord
Steps for connecting the power cord to the machine and outlet.
Starting the machine
How to turn on the machine's power switch.
Make the necessary settings
Details on setting date/time, serial number, and unit change.
Performing Non-Image Area Erase Check
Procedure to perform a check for non-image area data erase.
Configuring other options
Refers to separate manuals for configuring other options.
Connecting the network cable
Guidance on connecting the machine to a network using a network cable.
Network setting
Steps for setting up TCP/IP address, subnet mask, and default gateway.
Restarting the machine
Instructions on how to restart the machine after settings.
Adjusting each option
Refers to separate manuals for adjusting various machine options.
Affixing the paper size label
Instructions for applying paper size labels to the machine.
Installing the user's guide holder
Procedure for installing the user's guide holder.
Affixing the panel sheet
Guidance on attaching the panel sheet to the operation panel.
Checking for parts mounted on the machine
Verifies part numbers for the MFP board and eMMC board.
Switch setting for secured start
Instructions for setting a specific switch for secured start functionality.
Setting for Custom Function Pattern Selection
Procedure to import and select custom function patterns for enhanced security.
Precautions for operation control
Requirements of the service engineer
Outlines responsibilities and conduct expected from service engineers.
Protection of setting data in Service Mode
Emphasizes secure management of Service Mode passwords and settings.
Machine maintenance control
Precautions during maintenance and when adding options affecting security certification.
Miscellaneous
Additional notes for service engineers regarding user guides and language availability.
Checking the firmware version number
Security authentication firmware version number
Lists the required firmware versions for security authentication.
Accessing the Service Mode
Access method to the Service Mode
Detailed procedure to enter Service Mode using specific key presses and CE password.
Access lock of Service Mode
Explains how the Service Mode can become locked due to incorrect password attempts.
Access lock release procedure
Procedure to release the Service Mode access lock.
Enhancing the security function
Details of settings
Lists and describes specific settings related to enhancing security.
Security enhancing procedure
Step-by-step instructions to implement security enhancements.
Making and checking the service settings
Details on making and verifying service settings before enhancing security.
Requests to the administrator
Specifies settings the administrator must perform or check for security.
Functions disabled by the setting of Enhanced Security Mode
Lists functions that are automatically disabled when Enhanced Security Mode is enabled.
Functions whose settings are changed by Enhanced Security Mode
Details how various settings are modified when Enhanced Security Mode is activated.
Service Mode functions
Firmware Version
Function to display the machine's firmware version details.
Checking the firmware version number
Procedure to access and check the firmware version.
CE Authentication function
Function for service engineer identity verification using a CE password.
Setting the CE Authentication function
Steps to enable and configure the CE Authentication function.
Administrator Password function
Function for setting or resetting the administrator password.
Setting the administrator password
Procedure to set or change the administrator password.
CE Password function
Function to change the CE password used for Service Mode access.
Setting the CE password
Procedure to change the CE password.
Initialization function
Resets various settings to default values, clearing data.
Initialize method
Step-by-step procedure for performing data initialization or clear.
HDD Format
Procedures and warnings regarding HDD formatting to clear data.
HDD format execution procedure
Detailed steps for executing the HDD format process.
HDD installation setting
Setting to define whether the hard disk is installed or not.
HDD installation setting procedure
Steps to change the HDD installation setting.
Operation ban release time setting
Setting the duration before an access lock state is released.
Operation ban release time setting procedure
Procedure to set the time for releasing the operation ban.
Administrator Unlocking function
Function to release the Administrator password access lock state.
Administrator Unlocking function procedure
Steps to release the Administrator password access lock.
Overwrite All Data function
Overwrite All Data procedure
Steps to perform the Overwrite All Data function.
Items to be cleared by Overwrite All Data
Lists all data items that are cleared by the Overwrite All Data function.
Firmware rewriting
Outline
Provides an overview of firmware update methods via USB and network.
USB memory
Covers conditions and preparation for using USB memory for firmware updates.
Preparation
Requirements for USB memory compatibility and formatting.
Procedure
Step-by-step guide for performing firmware updates using USB memory.
Action when data transfer fails
Steps to take if the firmware data transfer fails.
Entering the machine type information
Procedure to input machine type information after replacing components.
FAX function
Installing/setting procedure of the FAX kit
Comprehensive guide for installing and configuring the FAX kit.
Install procedure
Step-by-step instructions for physically installing the FAX kit.
Installation of the ferrite core
Procedure for installing the ferrite core on the telephone cable.
Connecting the modular cable
Instructions for connecting the modular cable to the machine.
Affixing the labels
Procedure for affixing labels related to the FAX kit.
Setting procedure
Steps to configure the FAX function, including country code settings.
Caution when performing dial transfer
Advises on potential issues during dial transfer and how to resolve them.
Need help?
Do you have a question about the ineo 287 and is the answer not in the manual?
Questions and answers