Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Black Box LIG1082A
Summarization of Contents
SPECIFICATIONS
1.1 LIG1014A
Industrial Managed Gigabit Ethernet Switch specifications.
1.2 LIG1080A
Industrial Managed Gigabit Ethernet Switch specifications.
1.3 LIG1082A
Industrial Managed Gigabit Ethernet Switch specifications.
1.4 LIE1014A
Industrial Managed PoE Gigabit Ethernet Switch specifications.
1.5 LIE1080A
Industrial Managed PoE Gigabit Ethernet Switch specifications.
1.6 LIE1082A
Industrial Managed PoE Gigabit Ethernet Switch specifications.
1.7 System Statistics
Overview of system performance metrics and limits.
OVERVIEW
2.1 Introduction
General introduction to Industrial Gigabit Ethernet Switches.
2.2 Available Models
Lists the different Industrial Gigabit Ethernet Switch models available.
2.3 Features
Highlights key features of the switches like extended temperature and management.
2.4 What's Included
Lists the accessories included with specific switch models.
2.5 Hardware Description
Detailed description of hardware components and their functions.
INSTALLATION
3.1 DIN Rail Mounting
Instructions for mounting the switch on a DIN rail.
3.2 Wallmounting
Instructions for mounting the switch on a wall.
3.3 Alarm Relay and Ground
Details about the alarm relay output and grounding.
3.4 Connecting Ethernet Interface (RJ-45)
Guide to connecting Ethernet cables using RJ-45 ports.
3.5 Connecting Ethernet Interface (Fiber, SFP)
Guide to connecting fiber optic cables via SFP slots.
3.6 Power Connection
Instructions for connecting the power supply to the switch.
3.8 System Reset
Instructions on how to use the system reset button.
3.9 Console Connection
Guide for establishing a console connection for management.
3.10 Web Interface Initialization
Steps for initializing the web interface and browser recommendations.
3.11 CLI Initialization and Configuration
Steps for initializing and configuring via CLI.
3.12 Upgrade/Downgrade Software
Process for updating or downgrading the switch firmware.
3.13 Reset to Default and Save Configuration
Procedures for resetting configuration via CLI.
3.14 LED Status Indicators
Table detailing the meaning of each LED indicator on the switch.
SECURITY APPLICATION
5.1 Case 1: ACL for MAC Address
Configuring Access Control Lists (ACLs) based on MAC addresses.
5.2 ACL for IP Address
Configuring ACLs based on IP addresses.
5.3 ACL for L4 Port
Configuring ACLs based on Layer 4 ports (TCP/UDP).
5.4 ACL for ToS
Configuring ACLs based on Type of Service (ToS).
RING VERSION 2 APPLICATION
6.1 Ring Version 2 Feature
Explains the failover ring protection feature and roles.
6.2 How to Configure Ringv2
Console commands for configuring Ringv2 protection.
Ring Master Configuration
Steps for configuring ring master role via Web UI.
Ring Slave Configuration
Steps for configuring ring slave role via Web UI.
Coupling Configuration
Web UI steps for coupling primary and backup configurations.
Dual Homing Configuration
Web UI steps for dual homing configuration.
Chain Configuration
Web UI steps for chain member, head, and tail configurations.
Balance Chain Configuration
Web UI steps for balance chain central block and terminal configurations.
QOS APPLICATION
7.1 SP/SPWRR
Explanation of Strict Priority and SP+WRR scheduling methods.
7.2 Example 2: SPQ with Shaping
Demonstrates SPQ with shaping configuration and expected results.
IGMP APPLICATION
8.1 Example 1
Configuration for IGMP snooping and basic setup.
8.2 Example 2
Configuring IGMP snooping without unregistered flooding.
8.3 Example 3
VLAN configuration for IGMP clients.
8.4 VLC Configuration
Steps for configuring VLC on an IGMP server.
802.1X AUTHENTICATION APPLICATION
9.1 802.1x Timer Functions
Table of timer functions for 802.1x authentication.
9.2 RADIUS Server Configuration
Steps for configuring a RADIUS server for authentication.
9.3 Example
Example of 802.1x authentication with a RADIUS server.
POWER OVER ETHERNET APPLICATION
10.1 Reserved Power Determination
Modes for configuring how ports reserve power (Class, Allocated, LLDP-MED).
10.2 Power Management Mode
Two modes for managing power shutdown (Actual Consumption, Reserved Power).
10.3 Other Settings
Various PoE settings like power supply, mode, priority, and maximum power.
10.4 PoE Power Scheduling and Reset
How to schedule PoE power on/off and perform resets.
APPENDIX A. REGULATORY INFORMATION
A.1 FCC Statement
FCC compliance statement for Class A digital devices.
A.2 NOM Statement
Safety and operation instructions in Spanish for NOM compliance.
APPENDIX B. TRADEMARKS/DISCLAIMER
B.1 Disclaimer
Limitation of liability for damages from errors in the document.
B.2 Trademarks Used in this Manual
Lists registered trademarks of Black Box Corporation.
Need help?
Do you have a question about the LIG1082A and is the answer not in the manual?
Questions and answers