Using The Remote Control; System Menu; Settings - ZENEC ZEM-W702UIR Instruction Manual

USING THE REMOTE CONTROL

■ Battery type for replacement: CR2025
■ Insert a new battery with the (+) side up.
NOTE
■ Batteries and small parts can be a choking hazard. Keep the remote control away from
young children.
■ Direct sunlight or very bright light reduces sensitivity to the IR remote signal commands.
Make sure the monitor is not located in direct sunlight.
■ Remove batteries if they are empty or if the remote control will not be used for a long
time.

SYSTEM MENU

■ Press the MENU-button on the front panel or one of the MENU-buttons on the remote
control to enter the system menu:

SETTINGS

Page 1:
NEXT PAGE
COLOR
CONTRAST
BRIGHTNESS
HUE
RESET
Page 2:
PREV PAGE
WIDE MODE
DISP MODE
VIDEO
■ Page 2
■ Color adjustment
■ Contrast adjustment
■ Brightness adjustment
■ Adjustment to color saturation
■ Reset above menu to default value
■ Page 1
■ Select picture aspect ratio (16:9 or 4:3)
FULL NORMAL
➝
■ Reverse the picture (180°)
NORMAL REVERSE
➝
■ Video input signal format
PAL NTSC AUTO
➝ ➝
17
English