Related Manuals for Carel pCOxs series
Summarization of Contents
Introduction to PCO Sistema Controllers
General Features Overview
Provides an overview of the general characteristics of the PCO controllers.
PCO Controller Programmability
Explains the advantages of programming PCO controllers using EasyTools.
PCO Controller Applications
Lists the various applications and systems that can be controlled by PCO controllers.
PCO Controller Hardware Architecture
Details the hardware components and structure of the PCO controllers.
Description of PCO Products
PCO³ Controller Details
Describes the PCO³ controller, its inputs/outputs, and technical specifications.
pCO¹ Controller Details
Describes the pCO¹ controller, its inputs/outputs, and technical specifications.
pCO*s Board Details
Details the pCO*s board, including its inputs/outputs and technical specifications.
pCO Controller Details
Describes the pCO controller, its inputs/outputs, and technical specifications.
User Terminals
Graphic Terminals (pGD0-pGD3)
Details pGD0, pGD1, pGD2, and pGD3 graphic terminals, including installation.
Connecting User Terminals to PCO
Explains how to connect user terminals to the PCO controllers.
Installing the PCO Controller
General Installation Instructions
Covers general guidelines, wiring, and anchoring for PCO controller installation.
Power Supply Requirements
Details the power supply requirements and connection for PCO controllers.
Connecting Analogue Inputs
Explains how to connect various analogue sensors to PCO controllers.
Connecting Digital Inputs
Provides instructions for connecting digital inputs to PCO controllers.
Connecting Analogue Outputs
Explains how to connect analogue outputs from PCO controllers.
Connecting Digital Outputs
Provides instructions for connecting digital outputs from PCO controllers.
Configuration of the pLAN Network
Introduction to pLAN Network
Introduces the pLAN network and its capabilities for controller communication.
Installing Terminals (pGD & Aria)
Guides on installing and configuring pGD and Aria terminals within the pLAN network.
Setting pLAN Address
Describes how to set the pLAN network address for various PCO controllers.
pLAN Electrical Connections
Shows the electrical connections for linking pCO controllers in a pLAN network.
Remote Terminal Installation
Explains how to remotely install terminals in a pLAN network with different cable types.
pLAN Network Technical Specifications
Lists the technical specifications for the pLAN network, including baud rate and protocol.
Options and External Modules
Connectors Overview
Provides an overview of the connectors available for PCO system boards.
Optional pCO Sistema Boards
Introduces various optional boards for PCO controllers, like serial and expansion boards.
Signal LEDs and Software Updates
Explains signal LEDs and procedures for updating PCO controller software.
Updates, Firmware, and Logs
WinLoad Utility for Updates
Explains how to use WinLoad software for updating firmware and managing PCO controllers.
Smart Key Functionality
Describes the Smart Key programming tool for PCO controllers.
NAND FLASH Memory Usage
Details the NAND FLASH memory available on certain PCO3 versions.
Checking Software and System Information
Explains how to check the installed software version and other system information.
General Connection Diagrams
PCO Controller Connection Diagrams
Provides general connection diagrams for PCO controllers (SMALL, MEDIUM, LARGE models).
Troubleshooting Guide
Unit Start-up Issues
Troubleshooting steps for when the unit does not start (power LED off).
LCD Display Problems
Troubleshooting steps for LCD display issues on the PCO controller.
Input Signal Reading Errors
Guides on troubleshooting incorrect readings from input signals on PCO controllers.
Probe-Specific Troubleshooting
Specific troubleshooting for humidity, pressure, and NTC probes.
Digital Input and Watch-dog Issues
Troubleshooting for digital input alarms and Watch-dog mode problems.
Communication and Terminal Issues
Guides on troubleshooting serial connection and unresponsive terminal issues.
Networks and Protocols
pLAN Protocol
Explains the pLAN protocol, its capabilities, and connectable devices.
Local Terminal Protocol
Describes the local terminal protocol for point-to-point connections to PCO controllers.
CAREL Slave Protocol
Explains the CAREL Slave protocol for interfacing with supervisors and other systems.
CAREL Master Protocol
Details the CAREL Master protocol for communicating with peripherals using CAREL Slave.
CAREL Master 5 Expansions Protocol
Describes the CAREL Master 5 expansions protocol for I/O peripherals.
WinLoad Protocol
Explains the WinLoad protocol for managing PCO controllers via software.
PST Protocol
Describes the PST protocol for connecting to PST and PLD family terminals.
Modbus Slave Protocol
Explains the Modbus Slave protocol for connecting PCO controllers to Modbus supervisory systems.
Modbus Master Protocol
Details the Modbus Master protocol for acquiring and writing variables from Modbus devices.
Modbus Master Protocol - Benshaw
Explains the Modbus Master protocol specifically for Benshaw VFD control.
PSTN Protocol (Modem)
Describes the PSTN protocol for remote connection via modem to supervisors or WinLoad.
GSM Protocol (GSM Modem)
Explains the GSM protocol for remote connection and SMS messaging via modem.
MP-Bus Protocol
Describes the MP-Bus protocol for managing BELIMO actuators.
Serial Printer Protocol
Explains the serial printer protocol for connecting PCO to printers or terminal emulators.
Need help?
Do you have a question about the pCOxs series and is the answer not in the manual?
Questions and answers