ZENEC ZE-MC192 Instruction Manual page 95

Setting
Bass Freq
Treble Freq
Sub Filter
Sub Phase
Bass Q-Factor
FM/AM Gain
DVD Gain
AUX IN Gain
Bluetooth Gain
iPod Gain
NAVI Gain
SD Card Gain
DVB-T Gain
Options Function
60Hz
80Hz
Depending on the audio source, select the
100Hz
bass center frequency to achieve the best
130Hz
bass effect.
150Hz
200Hz
10KHz
Depending on the audio source, select
12.5KHz
the treble center frequency to achieve the
15KHz
best treble effect.
17KHz
80Hz
Selecting a crossover frequency sets
a cut-off frequency of the subwoofer's
LPF (low-pass filter) and the "SMALL"
120Hz
speakers' HPF (high-pass filter). The
crossover frequency setting has no effect
if the subwoofer is set to "Off" and any
160Hz
other speaker is set to "Large".
0° Subwoofer output IN phase.
180° Subwoofer output OUT OF phase.

NOTE: Depending on your installation,
reversing the subwoofer phase may
increase the bass output.
1.0
When the bass center frequency is
1.25
selected, adjusting the bass Q-factor
alters the sharpness of the bass output.
1.5
2.0
-7 bis +7 Adjust the FM/AM gain.
-7 bis +7 Adjust the DVD gain.
-7 bis +7 Adjust the AUX IN gain.
-7 bis +7 Adjust the Bluetooth gain.
-7 bis +7 Adjust the iPod gain.
-7 bis +7 Adjust the NAVI gain.
-7 bis +7 Adjust the SD Card gain.
-7 bis +7 Adjust the DVB-T gain.
95
ENGLISH