Dvd Player Operation; Opening/Closing The Tft Video Screen; Insert/Eject Disc; Reset The Loading Mechanism - ZENEC ZE-MC192 Instruction Manual

DVD PLAYER OPERATION


NOTE:
■ When properly installed, DVD video cannot be displayed on the main TFT screen unless
the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the
TFT screen displays caution information with a blue background. Rear video screens, if
applicable, will operate normally.

OPENING/CLOSING THE TFT VIDEO SCREEN

Opening the TFT screen
■ To open the TFT video screen, press the [
button on the remote control.
Closing the TFT screen
■ Press the
[OPEN]
again to close the TFT screen.

INSERT/EJECT DISC

Inserting a disc
■ When inserting a DVD disc, DVD mode is entered and the playback begins.

NOTE:
■ If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit
code must be entered and/or the disc must be authorized (see "RATING Parental Lock)
Menu").
■ You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE:
■ CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is
closed.
Ejecting a disc
■ Press the [ ] button on the front panel to eject the disc. The unit automatically reverts
to the tuner mode.

RESET THE LOADING MECHANISM

■ If the disc loads abnormally or does not play properly, press and hold the [
on the front panel to reset the loading mechanism. The disc is ejected and normal
operation resumes.

ACCESSING DVD MODE

■ To switch to DVD mode when a disc is already inserted, press the [SRC] button on the
front panel or on the remote control till DVD appears at the top of the screen.
button on
the front panel
button on
the front panel
OPEN]
or press the button on the remote control
[ ]
`
100
or press the
[ ]
`
] button