Pairing; Auto Connect; Making A Phone Call - ZENEC ZE-MC192 Instruction Manual

Setting Options

Pairing

Yes
Auto Answer Off
On
Connect Manual
Auto
PAIRING
■ Access the Bluetooth setup and press the "Yes" option on the screen, then "Wait pairing"
displays on the screen. Now you can pair a phone with the unit.
This unit can pair with 4 mobile phones in all, but just one can be active at a time.
The default phone will be retained only if all other paired phones are deleted.
Default phone: The phone that was first paired with the unit.
When maximum pairing has been completed, that is, four mobile phones have been
connected with the unit, and you want to still pair a new one, then the system will retain
the default phone and last used phone used. The phone least used (except the default
phone) will be deleted and the new paired phone will become the last used phone.
Last used phone: The phone connected with the unit that was used last.
If you want pair your phone with the unit, the password 1234 is used to complete the
pairing. When asked, enter this password in the phone which you are pairing with this
unit.

AUTO CONNECT

■ If the unit has been set to auto connect, it will attempt to connect to the last used phone
first.
■ If auto connect is not activated, the unit will return to the previous operating mode.
■ When the phone connects to the unit successfully, all of the cell phone's Bluetooth
enabled options will be active.

MAKING A PHONE CALL

■ There are four ways to make a phone call from this unit:
1. Make use of the number dial on the screen to make a call.
2. You can enter the phone number using the numeric keypad and press the OK button on
the remote control to make a call (only in the Bluetooth mode).
3. You can open the phone book and select one entry to make a call directly. Your cell
phone must support this option.
4. If your phone supports voice dial, access this mode on your phone instead of using the
phone book.
Function
Press the "Yes" button to start to wait for pairing with
one mobile phone.
Answer an incoming call manually.
The unit will automatically answer an incoming call
(based on the cell phone Bluetooth functions).
If this function is set to auto, connection between the
last used phone and this unit will take place.
124