ZENEC ZE-MC192 Instruction Manual page 90


NOTE:
■ Touch screen operations and buttons on the front panel are all useable to select the
menu and to adjust "SETTING". The following instructions will show the different ways
to access menus and adjustments.
SCREEN SETTING
Accessing the screen setup menu
■ Press the [SMART DIAL] button on the front panel or press the [MENU] button on the
O
remote control to access the MAIN menu.
■ Select the button on the bottom of the screen to access the screen setup.
Adjusting a Feature
Setting
Brightness
Screen tilt
Screen saver
TS calibrate
Version
Options Function
Press the
0 to 20
brightness.
Touch the (1 to 6) number on the screen
1 to 6 directly to adjust the tilt of the screen to
the desired degree.
ON
No function.
OFF
No Touch "Yes" to enter the touch screen
calibrate mode.
Yes
Current software version.
90
buttons to adjust the
[] /[]