Advertisement
Quick Links
Advertisement
Related Manuals for Carat P-3508
Summarization of Contents
Safety Information
Work Area Safety
Advice on maintaining a tidy workspace and safe environment to prevent injuries.
Electric Shock Prevention
Instructions to prevent body contact with grounded surfaces to avoid electric shock.
Child Safety
Keep unauthorized individuals, especially children, away from the work area.
Tool Storage and Use
Store tools safely and use them as intended for optimal performance and safety.
Personal Protective Equipment
Wear appropriate clothing, footwear, hair covering, and safety glasses.
Power Cord Care
Prevent damage to the power cord through improper handling or exposure.
Operational Stability and Alertness
Ensure stable stance, stay alert, and avoid unintentional starting.
Maintenance and Checks
Keep tools maintained, disconnect before servicing, check for damage, and remove keys.
Accessory and Switch Safety
Use recommended accessories and replace defective switches via authorized service centers.
Outdoor Cord Usage
Use only approved extension cords for outdoor use.
Safety Signs
Mandatory PPE Use
Mandatory use of personal protective equipment like safety eyewear and earmuffs.
Read Operating Instructions
Importance of reading and following operating instructions before each use.
Avoid High-Pressure Washing
Prohibition of cleaning the machine with high-pressure water jets.
Laser Accessory Guidance
Instructions related to the operation and use of the laser accessory.
Electrical Hazard Warning
Indicates the presence of electrical energy and associated hazards.
Carriage Securing Instruction
Instruction to secure the carriage during transport for safety.
Technical Data
Recommended Cutting Tools
Specifies the recommended cutting tool as a wet diamond blade for various materials.
Installation
Transporting the Machine
Instructions for safely moving the P-3500 machine using transport handles.
Handling and Moving
Guidance on moving the machine with the "transport wheels" accessory and a second person.
Machine Positioning
Steps to place the machine on a stable surface and prepare it for operation.
Cutting Operations
Work Area Safety
Ensure 150cm clearance and keep others away during cutting operations.
Material Placement
Ensure material is properly leaned against the tile stopper before cutting.
Cutting Thickness Up to 180mm
Procedure for cutting materials up to 180 mm thick by adjusting the cutting head.
45 Degree Cutting
Using the Laser Marker
Instructions for using the laser marker to guide cutting operations accurately.
Laser Marker Adjustment
Procedure for aligning the laser marker with the cutting line if it is misaligned.
Maintenance Procedures
Motor Carriage Adjustment
Steps for adjusting the motor carriage to correct vertical play for optimal performance.
Cleaning the Machine
Procedures for cleaning the machine, including the working table and recovery tank.
Need help?
Do you have a question about the P-3508 and is the answer not in the manual?
Questions and answers