Beretta IDRA DS 300 FI Installation And Operation Manual

Beretta IDRA DS 300 FI Installation And Operation Manual

Idra ds fi series solar storage cylinder

Advertisement

Installation and Operation Manual
IDRA DS FI
Solar | Solar storage cylinder
EN
Installation and Operation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IDRA DS 300 FI and is the answer not in the manual?

Questions and answers

Summarization of Contents

IDENTIFICATION
Data plate
Lists the technical specifications and performance of the product.
Serial number plate
Specifies the serial number and model.
TECHNICAL SPECIFICATIONS
PERFORMANCE RELATING TO INTEGRATION COIL
Upper coil continuous efficiency (ACS 10-45°C) (Vbu reference volume)
PERFORMANCE RELATING TO SOLAR COIL
Quantity of domestic water obtained in 10' with heater pre-heated to indicated temperature.
ELECTRICAL CONNECTIONS
Sensor connections
Route probe cables through guides and connect to regulator terminals.
Solar controller power connections
Route supply cable through guides and connect to regulator terminals.
DEVICE CLEANING AND MAINTENANCE
Checking the seals
Check hydraulic fitting sealing after commissioning to avoid short-circuits.
External cleaning
Clean outside with soft cloth in soapy water; dry cloth for insulation/display.
INTERVENTIONS ON THE HYDRAULIC SYSTEM
Draining the system
Connect hose to taps, allow full drainage, close taps, dispose fluid as per regulations.
Disassembling the circulator
Disconnect power, move wires, close valves, drain circuit, loosen nuts, remove circulator.

Table of Contents